TRUNNION ASSEM. 1U3458 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery - Recycle
Battery or Battery Cable - Disconnect
Fuel System - Prime
Generator - Dry
Generator Bearing Temperature - Test/Record
Generator Load - Check
Generator Set - Test
Generator Set Alignment - Check
Rotating Rectifier - Check
Rotating Rectifier - Inspect/Test
Every Week
Battery Electrolyte Level - Check
Electrical Connections - Check
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Generator - Inspect
Hoses and Clamps - Inspect/Replace
Walk-Around Inspection
Every Year
Alternator - Inspect
Belts - Inspect/Adjust/Replace
Coolant Sample (Level 2) - Obtain
Engine - Clean
Engine Mounts - Inspect
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Generator Set Vibration - Test/Record
Rotating Rectifier - Check
Starting Motor - Inspect
Water Pump - Inspect
Every 3 Years
Battery - Replace
Coolant Extender (ELC) - Add
Coolant Temperature Regulator - Replace
Every 6 Years
Coolant (ELC) - Change