TRUNNION AS 2097714 - Caterpillar

CID 1834 FMI 02Conditions Which Generate This Code:The Electronic Control Module (ECM) detects the following condition:The signal from the keyswitch was erratic because the keyswitch was cycled at least three times within the last second.Note: This code can be generated by rapidly cycling the keyswitch. Some control modules on the application may require this action in order to prompt flash codes. If this occurs, clear the logged diagnostic codes in order to prevent future confusion or an incorrect diagnosis.System Response:The ECM will log the diagnostic code and the warning light on the control panel will flash while this diagnostic code is active. The ECM will stop energizing the injector solenoids and the engine will shut down.Possible Performance Effect:Engine shutdownTroubleshooting:Test Step 1. Perform the following diagnostic procedure: "Ignition Keyswitch Circuit and Battery Supply Circuit - Test"Results:
OK - STOP