4T5405 TRUNNION AS Caterpillar parts
D7H, D7R, D7R II
Rating:
Alternative (cross code) number:
CA4T5405
4T-5405
4T5405
CA4T5405
4T-5405
4T5405
Weight: 103 pounds 46 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$463.72
23 May 2022
US: Florida-Parts-Z
2501984 - Trunnion 4T5405 fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$359.97
12 Mar 2018
7075 Hundredths Pounds
CTP: CTP
2501984 Trunnion-Forged Fits Caterpillar 4T5405 7A 7S 7SU 7U D7R II
Warranty
Warranty
$352.41
12 May 2022
70.7463[31.84] Pounds
US: ProperBuy
2501984 Trunnion-Forged Fits Caterpillar 4T5405 7A 7S 7SU 7U D7R II
TCP Warranty
TCP Warranty
Number on catalog scheme:
1
For full view, you need register
Information:
Remove Crankshaft Rear Seal
start by: a) remove flywheel 1. Remove the crankshaft rear seal, using seal puller group (A).Install Crankshaft Rear Seal
1. Install the crankshaft rear seal as follows: Use tool group (A).
TYPICAL EXAMPLEa) Install the locator assembly (3) and fastening screws (2) on the crankshaft.b) Put Loctite Sealant 8M8059 on the outer diameter of the metal portion of the seal. Put clean oil on the lip of the seal and the seal pilot (1). Install the seal on the seal pilot and put them into position on the locator assembly (3). The spring-loaded lip of the seal must be toward the front of the engine as shown.c) Put the seal installer ring (6) and pusher plate (5) into position on the stud of the locator assembly (3).d) Install the nut (4) and tighten the nut until the seal makes contact with inner surface of the flywheel housing.2. Remove tool group (A).end by: a) install flywheel
start by: a) remove flywheel 1. Remove the crankshaft rear seal, using seal puller group (A).Install Crankshaft Rear Seal
1. Install the crankshaft rear seal as follows: Use tool group (A).
TYPICAL EXAMPLEa) Install the locator assembly (3) and fastening screws (2) on the crankshaft.b) Put Loctite Sealant 8M8059 on the outer diameter of the metal portion of the seal. Put clean oil on the lip of the seal and the seal pilot (1). Install the seal on the seal pilot and put them into position on the locator assembly (3). The spring-loaded lip of the seal must be toward the front of the engine as shown.c) Put the seal installer ring (6) and pusher plate (5) into position on the stud of the locator assembly (3).d) Install the nut (4) and tighten the nut until the seal makes contact with inner surface of the flywheel housing.2. Remove tool group (A).end by: a) install flywheel
Caterpillar parts catalog:
Parts trunnion Caterpillar catalog:
235, 330 L, 3306, 3306B, 330B L, 350, 621E, 966F, 966F II, 966G, 970F, 972G, D6D, D6E SR, D6G SR, D6H, D6R, D7H
14M, 3P, 3S, 7A, 7S, 814B, 814F, 814F II, 814S, 824K, 834K, D3B, D3C, D3C II, D3C III, D4B, D4C, D4C II, D4C III, D5C, D5C III, D5H XL, D5R LGP, D6H, D6H II, D6H XL, D6H XR, D6M, D6N, D6N LGP, D6R, D6...
527, D5R LGP, D6E, D6E SR, D6G SR, D6H, D6H XL, D6H XR, D6R, D6R II, D7R
572R, D7H, D7R, D7R II, D7R XR
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 8A, 8S, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR, D8L, D8N, D8R, D8R...
7A, 824S, 826B, 826C, 834, 8A, 8S, 9A, D7G, D7G2, D7H, D7R, D7R II, D8H, D8N, D8R, D8R II, D9G, D9L
7G5131
TRUNNION
D7H
D7H
825G, 825G II, 825H, 825K, D7H, D7R, D7R II, D7R XR
6I8382
TRUNNION ASSEM.
D7H, D7R, D7R XR
D7H, D7R, D7R XR
8E9575
TRUNNION AS
D7H, D7R, D7R II, D7R XR
D7H, D7R, D7R II, D7R XR
D7R II, D7R XR
4T2776
TRUNNION
D4H
D4H
3H0012
TRUNNION
977D
977D
D8L, D8N, D9N, D9R, D9T
1J7019
TRUNNION
824B, 8A
824B, 8A