TRUNNION 5397802 - Caterpillar

Illustration 2 g03063257
(5) 272-4607 Block (6) 275-1364 Block (13) 108-4282 Bolt (21) 1P-3702 Rectangular Seal
Find the bottom port of the attachment valve located on the main control valve. Fasten block (6) and seal (21) to the port using bolts (13) .
Fasten block (5) to block (6) using bolts (13). Be sure to insert seal (21) in between blocks when assembling.
Insert connector (15) into block (5) .
Illustration 3 g03063376
(1) 7Y-3729 Special Flange (2) 266-1278 Block (3) 266-1303 Hose As (10) 337-1256 Block (12) 101-7404 Bolt (14) 129-3176 Bolt (15) 148-8327 Adapter As (17) 148-8357 Adapter As (19) 153-6237 Adapter As (20) 168-9671 Flange (21) 1P-3702 Rectangular Seal (22) 1P-3703 Rectangular Seal (24) 280-2747 Hex Socket Bolt (26) 4J-5267 O-Ring Seal (28) 6V-9746 O-Ring Seal
Fasten flange (20) to the top port of the attachment valve using seal (22) and bolts (12) .
Insert elbow (17) into the bottom port of block (10) .
Illustration 4 g03063396
(11) 434-8214 Pressure Sensor As (17) 148-8357 Adapter As
Connect pressure sensor (11) to the bottom of block (10) .
Locate the F2 valve on the main valve. Assemble flange (1) and o-ring (26) on to block (10). Attach flange and block on to the lower port of the F2 valve using bolts (14) and seal (22) .Note: Tighten all hardware to proper torque, as the hardware will not be accessible.
Connect elbow (17) to the top port of block (2). Connect elbow (19) to the side port of block (2) .
Fasten block (2) to the top port of the F2 valve using seal (21) and bolts (24) .
Illustration 5 g03547683
(4) 272-4438 Hose As (7) 286-6592 Hose As (8) 286-6596 Hose As (22) 1P-3703 Rectangular Seal
Connect the straight end of hose (4) to connector (15) located on block (5) .
Route angled end of hose (4) over to the F2 valve and connect to flange (1) located on block (10). Include o-ring (28) when making the connection.
Fasten the angled end of hose (3) and o-ring (28) on to flange (20) located on the top port of the attachment valve.
Route the straight end of hose (3) over to the F2 valve and connect to elbow (19) located on the side of block (2) .
Locate the tank manifold inside the main valve compartment. Insert connector (16) into the manifold.
Illustration 6 g03063416
(9) 286-6600 Hose As (16) 148-8333 Connector As (18) 148-8387 Adapter As (23) 1P-4578 Half Flange (25) 4J-0522 O-Ring Seal (27) 6V-0400 Half Flange (29) 8T-4121 Hard Washer (30) 8T-4184 Bolt (31) 8T-4196 Bolt (32) 8T-4223 Hard Washer
Fasten elbow (18) to connector (16) .
Connect hose (9) to elbow (18) .
Connect hose (8)