TRUNNION ASSEM. 7J7772 - Caterpillar

Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket or another work tool for the principal intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock or gravel. Additional work tools allow this machine to perform other specific tasks.Application/Configuration Restrictions
Refer to "Machine Data" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.The maximum fore and aft slope for proper lubrication is 25 degrees continuous and 35 degrees intermittent.This machine is approved for use in environments with no explosive gases.Machine Data
This machine is equipped with a 3516B Engine.The basic dimensions in the following table are for a machine with a 23 yd3 rock bucket and with the largest tires that are available. There are several different configurations for the buckets and the tires. The configurations can change the weight, the width, and the height of the machine.
Table 1
994F Wheel Loader
Approximate operating weight 191244 kg (421620 lb)
Length with the bucket 16712 mm (54.8 ft)
Width across front tires 5405 mm (17.7 ft)
Height at top of the exhaust stacks 6580 mm (21.6 ft)