TUBE A 0721264 - Caterpillar

Illustration 6 g06212796
(2) Current Operator ID (Identification) in the Lower Information Banner
(12) Operator ID menu button group
Continue the process to create up to ten (10) operator identifications.
Illustration 7 g06212801
Operator menu page (After an operator has already been entered in the Information Display)
(3) UP Arrow button
(4) OK button
(5) DOWN Arrow button
(6) BACK button
(7) HOME button
(13) Operator menu button groupThe Operator menu page now contains the following menu buttons:
Change Operator
Edit Current OperatorChanging from an Existing Operator to a Different Operator
Operator > Change Operator
Illustration 8 g06212814
Operator menu page
An operator (Operator 1) has already been selected and is visible in the Lower Information Banner (2).
(2) Current Operator ID (Identification) in the Lower Information Banner
(3) UP Arrow button
(4) OK button
(5) DOWN Arrow button
(6) BACK button
(7) HOME button
(8) Change Operator menu button
Press the Change Operator menu button (8). The button will first turn to blue, then to yellow. The Change Operator menu page will appear.
Illustration 9 g06212796
Change Operator menu page
(2) Current Operator ID (Identification) in the Lower Information Banner
(12) Change Operator ID menu button group
Select a specific operator by pressing the intended Operator menu button in the Change Operators menu button group (12). The button will first turn to blue, then turn to yellow. A black check mark will appear in the selected menu button.
Press the OK button (4). The selected operator’s identification will appear in the middle of the Lower Information Display Banner (2).If the operator already shown in the Lower Information Banner is to remain active, press the NEXT button (14).
Illustration 10 g06212822
Change Operator menu page
(2) Current Operator ID (Identification) in the Lower Information Banner
(3) UP Arrow button
(4) OK button
(5) DOWN Arrow button
(12) Operator ID menu button group
(14) NEXT button
Illustration 11 g06212825
Operator 1 has been changed to Operator 2. The change is now visible in the