0875563 TUBE AS Caterpillar parts
325, 325 L, 325 LN
Rating:
Alternative (cross code) number:
CA0875563
087-5563
0875563
CA0875563
087-5563
0875563
Weight: 13 pounds 5 kg.
EXCAVATOR,
Number on catalog scheme:
3
For full view, you need register
Information:
Special Lubricants
Grease
To use a non-Cat grease, the supplier must certify that the lubricant is compatible with Cat grease.Each pin joint should be flushed with the new grease. Ensure that all old grease is removed. Failure to meet this requirement may lead to failure of a pin joint.
Table 5
Recommended Lubricant for Manual Lubrication
Application Point Grease °C °F
Equalizer Bar Pin, Recoil Piston, Track Adjustment NLGI Min Max Min Max
Ultra 5 Moly Grease(1) 1 -35 50 -22 122
Advanced 3 Moly Grease(2) 2 -20 40 -4 104
Multipurpose Grease(3) 2 -30 40 -22 104
(1) High loading applications such as continuous excavating and loading from bank. Land clearing
(2) Medium loading such as bank or stockpile loading with idling periods. Load and carry.
(3) Low loading with large amounts of idling in any application.Reference: Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for additional information about grease. This manual may be found on the Web at Safety.Cat.com.Diesel Fuel Recommendations
Diesel fuel must meet “Caterpillar Specification for Distillate Fuel” and the latest versions of "ASTM D975" or "EN 590" to ensure optimum engine performance. Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for the latest fuel information and for Cat fuel specification. This manual may be found on the Web at Safety.Cat.com.The preferred fuels are distillate fuels. These fuels are commonly called diesel fuel, furnace oil, gas oil, or kerosene. These fuels must meet the “Caterpillar Specification for Distillate Diesel Fuel for Off-Highway Diesel Engines”. Diesel Fuels that meet the Caterpillar specification will help provide maximum engine service life and performance.Misfueling with fuels of high sulfur level can have the following negative effects:
Reduce engine efficiency and durability
Increase the wear
Increase the corrosion
Increase the deposits
Lower fuel economy
Shorten the time period between oil drain intervals (more frequent oil drain intervals)
Increase overall operating costs
Negatively impact engine emissionsFailures that result from the use of improper fuels are not Caterpillar factory defects. Therefore the cost of repairs would not be covered by a Caterpillar warranty.Caterpillar does not require the use of ULSD in off road and machine applications that are not Tier 4/Stage IIIB certified engines. ULSD is not required in engines that are not equipped with after treatment devices.Follow operating instructions and fuel tank inlet labels, if available, to ensure that the correct fuels are used.Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for more details about fuels and lubricants. This manual may be found on the Web at Safety.Cat.com.Fuel Additives
Cat Diesel Fuel Conditioner and Cat Fuel System Cleaner are available for use when needed. These products are applicable to diesel and biodiesel fuels. Consult your Cat dealer for availability.Biodiesel
Biodiesel is a fuel that can be made from various renewable resources that include vegetable oils, animal fat, and waste cooking oil. Soybean oil and rapeseed oil are the primary vegetable oil sources. To use any of these oils or fats as fuel, the oils or fats are chemically processed (esterified). The water and contaminants are removed.U.S. distillate diesel fuel specification "ASTM D975-09a" includes up to B5 (5 percent) biodiesel. Currently, any diesel fuel
Grease
To use a non-Cat grease, the supplier must certify that the lubricant is compatible with Cat grease.Each pin joint should be flushed with the new grease. Ensure that all old grease is removed. Failure to meet this requirement may lead to failure of a pin joint.
Table 5
Recommended Lubricant for Manual Lubrication
Application Point Grease °C °F
Equalizer Bar Pin, Recoil Piston, Track Adjustment NLGI Min Max Min Max
Ultra 5 Moly Grease(1) 1 -35 50 -22 122
Advanced 3 Moly Grease(2) 2 -20 40 -4 104
Multipurpose Grease(3) 2 -30 40 -22 104
(1) High loading applications such as continuous excavating and loading from bank. Land clearing
(2) Medium loading such as bank or stockpile loading with idling periods. Load and carry.
(3) Low loading with large amounts of idling in any application.Reference: Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for additional information about grease. This manual may be found on the Web at Safety.Cat.com.Diesel Fuel Recommendations
Diesel fuel must meet “Caterpillar Specification for Distillate Fuel” and the latest versions of "ASTM D975" or "EN 590" to ensure optimum engine performance. Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for the latest fuel information and for Cat fuel specification. This manual may be found on the Web at Safety.Cat.com.The preferred fuels are distillate fuels. These fuels are commonly called diesel fuel, furnace oil, gas oil, or kerosene. These fuels must meet the “Caterpillar Specification for Distillate Diesel Fuel for Off-Highway Diesel Engines”. Diesel Fuels that meet the Caterpillar specification will help provide maximum engine service life and performance.Misfueling with fuels of high sulfur level can have the following negative effects:
Reduce engine efficiency and durability
Increase the wear
Increase the corrosion
Increase the deposits
Lower fuel economy
Shorten the time period between oil drain intervals (more frequent oil drain intervals)
Increase overall operating costs
Negatively impact engine emissionsFailures that result from the use of improper fuels are not Caterpillar factory defects. Therefore the cost of repairs would not be covered by a Caterpillar warranty.Caterpillar does not require the use of ULSD in off road and machine applications that are not Tier 4/Stage IIIB certified engines. ULSD is not required in engines that are not equipped with after treatment devices.Follow operating instructions and fuel tank inlet labels, if available, to ensure that the correct fuels are used.Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for more details about fuels and lubricants. This manual may be found on the Web at Safety.Cat.com.Fuel Additives
Cat Diesel Fuel Conditioner and Cat Fuel System Cleaner are available for use when needed. These products are applicable to diesel and biodiesel fuels. Consult your Cat dealer for availability.Biodiesel
Biodiesel is a fuel that can be made from various renewable resources that include vegetable oils, animal fat, and waste cooking oil. Soybean oil and rapeseed oil are the primary vegetable oil sources. To use any of these oils or fats as fuel, the oils or fats are chemically processed (esterified). The water and contaminants are removed.U.S. distillate diesel fuel specification "ASTM D975-09a" includes up to B5 (5 percent) biodiesel. Currently, any diesel fuel
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 5...
120H, 120H ES, 120H NA, 135H NA, 213B, 214B, 224B, 3116, 3126, 320 L, 325, 325 L, 325 LN, 45, 55, 928G, 938F, 938G, 950F, 950F II, 950G, 953B, 953C, 960F, 962G, 963B, AP-1000, AP-1050, BG-2455C, BG-24...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 570, 574, 580, 613C I...
211B, 3114, 3116, 320B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 35, 45, 561M, 613C II, 950F, 950F II, 960F, 963B, 963C, AP-1000, AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C, CS-563D, CS-...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325 LN, 325B, 325B L, 35, 45, 533, 543, 55, 613C II, AP-1000, C7, DEUCE, M318, M320, M325B, ...
120G, 16G, 3116, 3176, 325 L, 325 LN, 3406C, 3412, 3412C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 5130, 572R II, 621G, 621H, 621K, 623G, 623H, 623K, 623K LR...
16G, 215, 215B, 225, 227, 235, 245, 245B, 312B, 315B, 320, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320N, 322, 322 L, 322B, 322B L, 325, 325B, 325B L, 325C L, 330, 330 L, 3306, 330B, 330B L, 345...
7Y6506
TUBE AS
322 L, 322B, 322B L, 322C, 322C FM, 325, 325 L, 325B L, 325C, 325C L, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
322 L, 322B, 322B L, 322C, 322C FM, 325, 325 L, 325B L, 325C, 325C L, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
6C6468
TUBE AS
325 LN, 325B L
325 LN, 325B L
7Y1285
TUBE AS
325, 325 LN
325, 325 LN
6C6227
TUBE AS
325 LN
325 LN
6C6304
TUBE AS
325 LN
325 LN
0875561
TUBE AS
325, 325 L, 325 LN
325, 325 L, 325 LN
4I1608
TUBE AS
325 L, 325 LN
325 L, 325 LN
4I1611
TUBE AS
325 L, 325 LN
325 L, 325 LN
4I1609
TUBE AS
325 L, 325 LN
325 L, 325 LN
4I1610
TUBE AS
325 L, 325 LN
325 L, 325 LN
4I6189
TUBE AS
325, 325 L, 325 LN
325, 325 L, 325 LN
0874478
TUBE AS
325 LN
325 LN
0874470
TUBE AS
325 LN
325 LN
0874477
TUBE AS
325 LN
325 LN
0874469
TUBE AS
325 LN
325 LN
0875564
TUBE AS
325, 325 L, 325 LN
325, 325 L, 325 LN
0875562
TUBE AS
325, 325 L, 325 LN
325, 325 L, 325 LN