0875564 TUBE AS Caterpillar parts
325, 325 L, 325 LN
Rating:
Alternative (cross code) number:
CA0875564
087-5564
0875564
CA0875564
087-5564
0875564
Weight: 13 pounds 5 kg.
EXCAVATOR,
Number on catalog scheme:
8
For full view, you need register
Information:
Illustration 1 g06176900
Monitoring system instrument module
(1) Action lamp shownCheck the operation of the Caterpillar Monitoring System.The system performs an automatic self test when you turn the engine start switch to the ON position.The self test verifies that the monitoring panel and the display modules are operating properly.The internal circuits, the indicators, and the gauges are automatically checked.The operator must observe the indicators and the gauges to determine whether the modules, the indicators, and the gauges are operating properly. The self test lasts for approximately 3 seconds.During the self test, all alert indicators flash.The pointers in the gauges point upward. Then, the pointers point to the left. Then, the pointers point to the right. Then, the pointers point to the final positions and the action alarm sounds once.The monitoring panel is then in the normal operating mode.If the above tests are not correctly completed, the system will not function in the normal operating mode. Consult your Cat dealer for an electrical system check. Any repairs must be made before you start the engine.Braking System Test
Fasten the seat belt.
Park the machine on a hard, dry, level surface.
Check the area around the machine. Make sure that the machine is clear of personnel and clear of obstacles.The following tests are used to determine whether the braking system is functional. These tests are not intended to measure the maximum brake holding effort. The required brake holding effort for sustaining a machine at a specific engine rpm varies from one machine to another machine. The variations include differences in the engine setting, the power train efficiency, the brake holding ability, and so on.Service Brake Holding Ability Test
Personal injury can result if the machine moves while testing.If the machine begins to move during test, reduce the engine speed immediately and engage the parking brake.
This test is performed when the service brakes are engaged. If the machine begins to move, compare the engine rpm to the engine rpm of a prior test. This comparison will indicate the amount of system deterioration.
Start the engine. Raise the work tool slightly. Apply the service brake. Release the parking brake.
Move the hydraulic lockout control to the UNLOCKED position.
Place the transmission in FORWARD while the service brakes are applied.
Gradually increase the engine speed. The machine should not move.
Reduce the engine speed. Place the transmission in Neutral. Engage the parking brake. Lower the work tool to the ground. Stop the engine.If the machine moved during the test, consult your Cat dealer for a brake inspection. Make any necessary repairs before the machine is returned to operation.
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 5...
120H, 120H ES, 120H NA, 135H NA, 213B, 214B, 224B, 3116, 3126, 320 L, 325, 325 L, 325 LN, 45, 55, 928G, 938F, 938G, 950F, 950F II, 950G, 953B, 953C, 960F, 962G, 963B, AP-1000, AP-1050, BG-2455C, BG-24...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 570, 574, 580, 613C I...
211B, 3114, 3116, 320B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 35, 45, 561M, 613C II, 950F, 950F II, 960F, 963B, 963C, AP-1000, AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C, CS-563D, CS-...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325 LN, 325B, 325B L, 35, 45, 533, 543, 55, 613C II, AP-1000, C7, DEUCE, M318, M320, M325B, ...
120G, 16G, 3116, 3176, 325 L, 325 LN, 3406C, 3412, 3412C, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 5130, 572R II, 621G, 621H, 621K, 623G, 623H, 623K, 623K LR...
16G, 215, 215B, 225, 227, 235, 245, 245B, 312B, 315B, 320, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320N, 322, 322 L, 322B, 322B L, 325, 325B, 325B L, 325C L, 330, 330 L, 3306, 330B, 330B L, 345...
7Y6506
TUBE AS
322 L, 322B, 322B L, 322C, 322C FM, 325, 325 L, 325B L, 325C, 325C L, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
322 L, 322B, 322B L, 322C, 322C FM, 325, 325 L, 325B L, 325C, 325C L, 325D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
6C6468
TUBE AS
325 LN, 325B L
325 LN, 325B L
7Y1285
TUBE AS
325, 325 LN
325, 325 LN
6C6227
TUBE AS
325 LN
325 LN
6C6304
TUBE AS
325 LN
325 LN
0875562
TUBE AS
325, 325 L, 325 LN
325, 325 L, 325 LN
0875563
TUBE AS
325, 325 L, 325 LN
325, 325 L, 325 LN
0875561
TUBE AS
325, 325 L, 325 LN
325, 325 L, 325 LN
4I1608
TUBE AS
325 L, 325 LN
325 L, 325 LN
4I1611
TUBE AS
325 L, 325 LN
325 L, 325 LN
4I1609
TUBE AS
325 L, 325 LN
325 L, 325 LN
7Y5749
TUBE AS-RH
325 LN
325 LN
7Y5686
TUBE AS-LH
325 LN
325 LN
0874478
TUBE AS
325 LN
325 LN
0874470
TUBE AS
325 LN
325 LN
0874477
TUBE AS
325 LN
325 LN
0874469
TUBE AS
325 LN
325 LN