1119877 TUBE Caterpillar parts
D6M
Rating:
Alternative (cross code) number:
CA1119877
111-9877
1119877
CA1119877
111-9877
1119877
Weight: 15 pounds 7 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
New Starter Solenoid 12V for Delco 30/35MT Series Fits Starters: 1113193 44-4562 91-01-4063 400121R92 1113202 91-01-3763 1113203 91-01-3998 323-707 323-716 91-01-3783 1113217 1113216 12301370
Gladiator Meets or exceeds OEM specifications || One year Warranty! || HI Heat Cap!
Gladiator Meets or exceeds OEM specifications || One year Warranty! || HI Heat Cap!
Intended for Solenoid 12 Volt Fits s 1119859 1119877 1119882 111988 D851 D955 D959 Reliable Performance Upgrade
Generic Intended for Delco 1115501 1115508 1115510 1115521 1115529 1115531 1115540 1115582 1119778 1119818 1119833 1119842 1119859 1119877 1119882 1119883 1119885 1119890 1119935 D851 D853 D954 D955 D959 D954 D959 D970 D971 D976 D980 D985. || Universal Fit Options: Available for cars, trucks, boats, ATVs, and more. || Tested for Quality: Every unit is tested for performance and reliability. || Vehicle Compatibility: Suitable for a wide range of vehicle makes and models. || If you have any questions about this product, please contact us. We will be happy to help.
Generic Intended for Delco 1115501 1115508 1115510 1115521 1115529 1115531 1115540 1115582 1119778 1119818 1119833 1119842 1119859 1119877 1119882 1119883 1119885 1119890 1119935 D851 D853 D954 D955 D959 D954 D959 D970 D971 D976 D980 D985. || Universal Fit Options: Available for cars, trucks, boats, ATVs, and more. || Tested for Quality: Every unit is tested for performance and reliability. || Vehicle Compatibility: Suitable for a wide range of vehicle makes and models. || If you have any questions about this product, please contact us. We will be happy to help.
Replacement Compatible with Solenoid 12 Volt Fits s 1119859 1119877 1119882 111988 D851 D955 D959
Generic Replacement Compatible with Delco 1115501 1115508 1115510 1115521 1115529 1115531 1115540 1115582 1119778 1119818 1119833 1119842 1119859 1119877 1119882 1119883 1119885 1119890 1119935 D851 D853 D954 D955 D959 D954 D959 D970 D971 D976 D980 D985. || Tested for Quality: Every unit is tested for performance and reliability. || Vehicle Compatibility: Suitable for a wide range of vehicle makes and models. || Universal Fit Options: Available for cars, trucks, boats, ATVs, and more. || If you have any questions about this product, please contact us. We will be happy to help.
Generic Replacement Compatible with Delco 1115501 1115508 1115510 1115521 1115529 1115531 1115540 1115582 1119778 1119818 1119833 1119842 1119859 1119877 1119882 1119883 1119885 1119890 1119935 D851 D853 D954 D955 D959 D954 D959 D970 D971 D976 D980 D985. || Tested for Quality: Every unit is tested for performance and reliability. || Vehicle Compatibility: Suitable for a wide range of vehicle makes and models. || Universal Fit Options: Available for cars, trucks, boats, ATVs, and more. || If you have any questions about this product, please contact us. We will be happy to help.
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 1119877:
Information:
System OperationUse this procedure to troubleshoot any suspect problems with the following sensors for the primary ECM:
Coolant temperature sensor
Intake manifold air temperature sensor
Engine oil temperature sensor
Illustration 1 g03382025
Schematic of the analog sensor signal circuit
Illustration 2 g03382032
Terminal locations at the P1 ECM connector for the passive sensors
(P1-26) Engine oil temperature
Illustration 3 g03382037
Terminal locations at the P2 ECM connector for the passive sensors
(P2-17) Common Return
(P2-83) Common Return
(P2-84) Engine coolant temperature
(P2-95) Intake manifold air temperature
Illustration 4 g01155187
Terminal locations at the connector for the passive analog sensors
(Terminal 1) Sensor signal
(Terminal 2) Sensor return
Table 2
Troubleshooting Test Steps Values Results
1. Check for "Active" or "Logged" Diagnostic Codes
A. Connect Caterpillar Electronic Technician (ET) to the service tool connector.
B. Restore the electrical power to the ECM.
C. Monitor the diagnostic codes on Cat ET. Check and record any diagnostic codes.
Note: Wait at least 30 seconds in order for the diagnostic codes to become active.
D. Determine if the problem is active and related to one of the following diagnostic codes:
-3
-4
Codes
Result: No diagnostic codes are active at this time.
Repair: The problem may be intermittent. If the problem is intermittent refer to Troubleshooting, "Electrical Connectors - Inspect".
Result: An active -3 diagnostic code is present.
Proceed to Test Step 2
Result: An active -4 diagnostic code is present.
Proceed to Test Step 4
2. Check for a Short to the +Battery at the Sensor Connector
A. Measure the voltage on the harness side of the sensor connector between pin 1 and pin 2 for the suspect sensor.
+Battery
Result: The supply voltage is less than Battery voltage.
Proceed to Test Step 3.
Result: The supply voltage is equal to Battery voltage.
Repair: There is a short in the harness to the +Battery. Repair the wiring.
Verify that the repair eliminated the problem.
3. Create a Short at the Sensor Connector
A. Turn the main disconnect switch to the OFF position.
B. Disconnect the suspect sensor.
C. Use a wire jumper in order to create a short between terminal 1 (signal) and terminal 2 (sensor return) at the sensor connector.
D. Restore the electrical power to the ECM.
E. Access the "Active Diagnostic
Coolant temperature sensor
Intake manifold air temperature sensor
Engine oil temperature sensor
Illustration 1 g03382025
Schematic of the analog sensor signal circuit
Illustration 2 g03382032
Terminal locations at the P1 ECM connector for the passive sensors
(P1-26) Engine oil temperature
Illustration 3 g03382037
Terminal locations at the P2 ECM connector for the passive sensors
(P2-17) Common Return
(P2-83) Common Return
(P2-84) Engine coolant temperature
(P2-95) Intake manifold air temperature
Illustration 4 g01155187
Terminal locations at the connector for the passive analog sensors
(Terminal 1) Sensor signal
(Terminal 2) Sensor return
Table 2
Troubleshooting Test Steps Values Results
1. Check for "Active" or "Logged" Diagnostic Codes
A. Connect Caterpillar Electronic Technician (ET) to the service tool connector.
B. Restore the electrical power to the ECM.
C. Monitor the diagnostic codes on Cat ET. Check and record any diagnostic codes.
Note: Wait at least 30 seconds in order for the diagnostic codes to become active.
D. Determine if the problem is active and related to one of the following diagnostic codes:
-3
-4
Codes
Result: No diagnostic codes are active at this time.
Repair: The problem may be intermittent. If the problem is intermittent refer to Troubleshooting, "Electrical Connectors - Inspect".
Result: An active -3 diagnostic code is present.
Proceed to Test Step 2
Result: An active -4 diagnostic code is present.
Proceed to Test Step 4
2. Check for a Short to the +Battery at the Sensor Connector
A. Measure the voltage on the harness side of the sensor connector between pin 1 and pin 2 for the suspect sensor.
+Battery
Result: The supply voltage is less than Battery voltage.
Proceed to Test Step 3.
Result: The supply voltage is equal to Battery voltage.
Repair: There is a short in the harness to the +Battery. Repair the wiring.
Verify that the repair eliminated the problem.
3. Create a Short at the Sensor Connector
A. Turn the main disconnect switch to the OFF position.
B. Disconnect the suspect sensor.
C. Use a wire jumper in order to create a short between terminal 1 (signal) and terminal 2 (sensor return) at the sensor connector.
D. Restore the electrical power to the ECM.
E. Access the "Active Diagnostic
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 5...
120H, 120H ES, 120H NA, 135H NA, 213B, 214B, 224B, 3116, 3126, 320 L, 325, 325 L, 325 LN, 45, 55, 928G, 938F, 938G, 950F, 950F II, 950G, 953B, 953C, 960F, 962G, 963B, AP-1000, AP-1050, BG-2455C, BG-24...
120H, 120H ES, 120H NA, 135H, 135H NA, 214B, 3114, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 570, 574, 580, 613C I...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 2470C, 2570C, 2670C, 2864C, 320C, 325C, 330C,...
211B, 3114, 3116, 320B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 35, 45, 561M, 613C II, 950F, 950F II, 960F, 963B, 963C, AP-1000, AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C, CS-563D, CS-...
1476541
TUBE
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 24H, 515, 525, 525B, 535B, 545, 69D, 725, 730...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 24H, 515, 525, 525B, 535B, 545, 69D, 725, 730...
D5, D5B, D5H, D5H XL, D5HTSK II, D6M
1141962
TUBE
D6M
D6M
D6M
D6M
1119874
TUBE AS
D6M
D6M
D6M
1119872
TUBE AS
D6M
D6M
1119874
TUBE AS
D6M
D6M
1128226
TUBE
D6M
D6M
1128225
TUBE
D6M
D6M
1115009
TUBE
561M, D5M, D6M
561M, D5M, D6M
1106058
TUBE
D6M
D6M
1949306
TUBE AS
D6M
D6M
1949305
TUBE AS
D6M
D6M
5Q8330
TUBE
D6M
D6M
5Q8329
TUBE
D6M
D6M
5Q8321
TUBE AS
D6M
D6M
5Q8320
TUBE AS
D6M
D6M