TUBE AS 1159211 - Caterpillar

Illustration 15 g06031524
Verify that the software files are installed.
Illustration 16 g06031526
Press the Menu icon to view the ECM summary.
Illustration 17 g06031530
Select Grade Control.
Illustration 18 g06031574
Verify software version of RB410.Verifying the Software on Displays
The software can also be verified at each display.
Illustration 19 g06031581
Select Diagnostics.
Illustration 20 g06031584
Select Report.
Illustration 21 g06031586
Verify the software version.Installing the Option Keys
The following steps detail the installation of Cat Grade and Slope option keys.Note: This procedure is not required unless the RB410 controller has been replaced.Note: Prior to starting this procedure, submit a DSN ticket to create and receive the required option code file.Include the following information in your request.
Machine Model
Machine Serial Number
Failed RB410 Serial Number
New RB410 Serial Number
Brief description of failure
Place the Option Key file on the root, not in a folder, of a USB drive.
Illustration 22 g06036809
(A) Machine power switch
(B) USB port
(C) Manometer
(D) Service connector
(E) VIMS ethernet connector
Insert the USB drive into the USB port on the machine.Note: If there is not a USB port at this location, the USB port location has been moved to the right hand operators station. For these machines, use the Right Hand tractor display in the next steps.
Use the left tractor LCD display to update Cat Grade and Slope.
Illustration 23 g06031483
Press the Grade and Slope icon to enter the Grade and Slope screens.
Illustration 24 g06031495
Press the Menu icon to enter the Grade and Slope menus.
Illustration 25 g06031500
Enter the Installation menu.
Illustration 26 g06031950
Accept the caution message by pressing OK.Note: Press the Unlock button followed by the OK button within 1 second to proceed.
Illustration 27 g06031588
Enter the Option Keys menu.
Illustration 28 g06031592
Option Keys will automatically read and a success message will appear.