TUBE AS 1184580 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools    
Tools    Part Number    Description    Qty    
A     8T-0862     Pressure Gauge
0 to 500 kPa (0 to 70 psi)     2    
B     6V-4144     Quick Connect Coupler     2    
C     6V-3965     Fitting As     2    
D     3J-1907     O-Ring Seal     2    
Drive the machine to a smooth, horizontal surface.
Illustration 1 g01158073
Move propulsion lever (2) to the NEUTRAL position.
Rotate speed dial (3) to the MINIMUM position.
Move parking brake switch (4) to the ON position.
Move screed lower switch (6) to the DOWN position. Lower the screed to the ground.
Move throttle control switch (5) to the LOW IDLE position. Hold the switch in this position for