TUBE AS 1196018 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2 Start By:
Remove the rear axle. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) - Remove".
Illustration 1 g01102506
Remove yoke assembly (1) from the pinion shaft.
Illustration 2 g01076656
Position the rear axle assembly in a suitable stand or block in position, as shown.
Install Tooling (A) and a suitable lifting device to front trunnion support (2). The weight of the front trunnion support is approximately 87 kg (192 lb). Remove front support trunnion (1) from the differential pinion housing.
Illustration 3 g01102510
Position front trunnion support (2) on wood blocks.
Remove O-ring seal (4).
Remove 12 bolts (5) from retainer (3).
Illustration 4 g01076672
Use two bolts (5) as forcing screws to remove retainer (3) from the front trunnion support.
Remove gasket (6) (not shown) from the front trunnion support.
Illustration 5 g01076673
Turn the front trunnion support remove O-ring seal (7).
Use a hammer and a punch in order to remove sleeve bearing (8) from the front trunnion support.