TUBE 1249569 - Caterpillar

All daily grease lubricant should be applied at the end of each machine operation while the machine is still warm and the asphalt is still soft or not set up. Failure to do so may allow asphalt to harden around the seals and risk damaging a seal and lead to premature bearing failure.
Illustration 1 g02047799
Lubricate the four grease fittings on the front right side of the machine. These grease fittings will provide grease to the front bearings. When you use a standard grease gun, pump 15 pumps per fitting. The grease should purge the bearings.
Illustration 2 g02151217
The grease points are located behind the right access door. Lubricate the four grease fittings on the rear right side of the machine. These grease fittings will provide grease to the rear bearings. When you use a standard grease gun, pump 15 pumps per fitting. The grease should purge the bearings.