1295865 TUBE AS Caterpillar parts
320B, 320B FM LL, 320B L, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L
Rating:
Alternative (cross code) number:
CA1295865
129-5865
1295865
CA1295865
129-5865
1295865
Weight: 4 pounds 2 kg.
EXCAVATOR,
Compatible equipment models: 1295865:
Number on catalog scheme:
1
For full view, you need register
Information:
Warnings
Refer to the following warnings and notices for all inspections and tests of the power train.
Sudden movement of the machine or release of oil under pressure can cause injury to persons on or near the machine.To prevent possible injury, perform the procedure that follows before testing and adjusting the power train.
Hot hydraulic oil under high pressure can remain in the components of the hydraulic system or the power train system after the engine has been stopped. The uncontrolled release of the hydraulic oil can cause sudden machine movement and can also result in the following conditions:
Burns
The penetration of body tissue
Other personal injury
DeathIf hydraulic oil penetrates body tissue, the injury must be treated immediately by a doctor who is familiar with this type of injury. Use a board or a piece of cardboard to check for a hydraulic oil leak. Make sure that all of the attachments have been lowered to the ground and that all trapped pressure has been released from the hydraulic system and the power train system. Also, make sure that the hydraulic oil is cool before the removal of any components or lines. Remove the hydraulic oil filler cap only when the engine is stopped and the filler cap is cool enough to touch with your bare hand.
Escaping fluid under pressure, even a pinhole size leak, can penetrate body tissue, causing serious injury, and possible death. If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.Always use a board or cardboard when checking for a leak.
Personal injury or death can result from not engaging the parking brake.Transmission engagement alone will not prevent machine from rolling when the engine is stopped.
Personal injury can result if the machine moves while testing.If the machine begins to move during test, reduce the engine speed immediately and engage the parking brake.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Procedure
Before you troubleshoot, complete the following procedure.
Permit only one operator on the machine. Keep all other personnel away from the machine or in the operator sight.
Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.
Decrease the engine speed.
Apply the service brakes in order to slow the machine. Apply the transmission modulator control (inching pedal) in order to stop the machine.
Place the transmission control switch in the NEUTRAL position.
Engage the parking brake.
Lower the attachments to the ground.
Stop the engine.
Turn the key to the ON position, but do not start the engine.
Verify that the implement controls are UNLOCKED.
Move the control levers through the full range of travel several times. Moving the control levers
Refer to the following warnings and notices for all inspections and tests of the power train.
Sudden movement of the machine or release of oil under pressure can cause injury to persons on or near the machine.To prevent possible injury, perform the procedure that follows before testing and adjusting the power train.
Hot hydraulic oil under high pressure can remain in the components of the hydraulic system or the power train system after the engine has been stopped. The uncontrolled release of the hydraulic oil can cause sudden machine movement and can also result in the following conditions:
Burns
The penetration of body tissue
Other personal injury
DeathIf hydraulic oil penetrates body tissue, the injury must be treated immediately by a doctor who is familiar with this type of injury. Use a board or a piece of cardboard to check for a hydraulic oil leak. Make sure that all of the attachments have been lowered to the ground and that all trapped pressure has been released from the hydraulic system and the power train system. Also, make sure that the hydraulic oil is cool before the removal of any components or lines. Remove the hydraulic oil filler cap only when the engine is stopped and the filler cap is cool enough to touch with your bare hand.
Escaping fluid under pressure, even a pinhole size leak, can penetrate body tissue, causing serious injury, and possible death. If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.Always use a board or cardboard when checking for a leak.
Personal injury or death can result from not engaging the parking brake.Transmission engagement alone will not prevent machine from rolling when the engine is stopped.
Personal injury can result if the machine moves while testing.If the machine begins to move during test, reduce the engine speed immediately and engage the parking brake.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Procedure
Before you troubleshoot, complete the following procedure.
Permit only one operator on the machine. Keep all other personnel away from the machine or in the operator sight.
Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.
Decrease the engine speed.
Apply the service brakes in order to slow the machine. Apply the transmission modulator control (inching pedal) in order to stop the machine.
Place the transmission control switch in the NEUTRAL position.
Engage the parking brake.
Lower the attachments to the ground.
Stop the engine.
Turn the key to the ON position, but do not start the engine.
Verify that the implement controls are UNLOCKED.
Move the control levers through the full range of travel several times. Moving the control levers
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C,...
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 235C, 330, 330 L, 3306, 3306B, 3306C, 330B, 330B L, 350, 528B, 530B, 545, 5...
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 330 L, 3306, 3306B, 3306C, 330B, 330B L, 350, 528B, 530B, 545, 572G, 572R, ...
211B, 3114, 3116, 320B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 35, 45, 561M, 613C II, 950F, 950F II, 960F, 963B, 963C, AP-1000, AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C, CS-563D, CS-...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325 LN, 325B, 325B L, 35, 45, 533, 543, 55, 613C II, AP-1000, C7, DEUCE, M318, M320, M325B, ...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 307B, 317B LN, 318B, 322B L, 325B L, 330B L, 345B, 34...
16G, 215, 215B, 225, 227, 235, 245, 245B, 312B, 315B, 320, 320 L, 320B, 320B FM LL, 320B L, 320B U, 320C, 320N, 322, 322 L, 322B, 322B L, 325, 325B, 325B L, 325C L, 330, 330 L, 3306, 330B, 330B L, 345...
305.5, 306, 306E, 307B, 307C, 307D, 308C, 311C, 312C, 312C L, 314C, 315C, 318C, 319C, 320B, 320C, 320C FM, 321C, 322B L, 322C, 325C, 330B L, 330C, 330C L, 330C MH, 345B II, 345B II MH, 345C, 345C L, 3...
318B, 318C, 320 L, 320B, 320C, 320C FM, 320C L, 321C, 322C, 325B L, 325C L, 330D L
311, 311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D F...
320 L, 320B
325B L
1276840
TUBE AS
322B, 322B L
322B, 322B L
1241257
TUBE AS
322B, 322B L, 322B LN
322B, 322B L, 322B LN
1241222
TUBE AS
322B, 322B L, 322B LN
322B, 322B L, 322B LN
1136477
TUBE AS
320B, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
320B, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, M325B, W330B
1241116
TUBE AS
320B, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L
320B, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L
1319652
TUBE AS
322B, 322B L, 322B LN
322B, 322B L, 322B LN
1192491
TUBE AS
322B L, 325B, 325B L, M325B
322B L, 325B, 325B L, M325B
1345243
TUBE AS
322B L, 325B L, 330B L, M325B
322B L, 325B L, 330B L, M325B
1594842
TUBE AS
320B, 322B L, 322B LN, 325B L, 330B L
320B, 322B L, 322B LN, 325B L, 330B L
1594843
TUBE AS
320B, 322B L, 322B LN, 325B L, 325D, 330B L
320B, 322B L, 322B LN, 325B L, 325D, 330B L
1241281
TUBE AS
322B L, 322B LN
322B L, 322B LN
1216270
TUBE AS
320B, 320B FM LL, 320B L, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L
320B, 320B FM LL, 320B L, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L