1355010 TUBE-HEAT SHRINK Caterpillar parts
10-20B, 120M, 12M, 140M, 14M, 160M, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 789D, 793F CMD, 793F-XQ, 797F, 8-16B, 834K, 836K, 844K, 854K, 924H, 938G II, 938H, 950G II, 950H, 950K, 962K...
Rating:
Alternative (cross code) number:
CA1355010
135-5010
1355010
CA1355010
135-5010
1355010
Weight: 0.01 pounds 0 kg.
Information:
ID
50
mm
TYPE
000000000004
UNIT MEASURE
CM
ASPHALT PAVER, WHEEL TRACTOR-SCRAPER,
Compatible equipment models: 1355010:
Number on catalog scheme:
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 152-4250 Hydraulic Cylinder Repair Stand 1 Start By:
Remove the rear suspension cylinder.
In order to prevent possible personal injury, remove the nitrogen charge before the disassembly of the front suspension cylinder.
High pressure cylinder. Do not remove any parts until pressure has been relieved or personal injury may occur.
Ensure that the nitrogen has been discharged from the suspension cylinder. Refer to Special Instruction, REHS4445, "Servicing the Suspension Cylinders for Off-Highway Trucks".
Illustration 1 g01419760
Position a suitable container below the rear suspension cylinder. Drain any remaining hydraulic oil from the rear suspension cylinder into a suitable container for disposal or storage.
In order to prevent possible personal injury, use a suitable fixture to support the weight of the suspension cylinder. Do not attempt to stand the suspension cylinder on end without the use of a suitable support. Failure to use a suitable support fixture could result in injury or death to personnel in this area.
Position the rear suspension cylinder in Tooling (A) . The weight of the rear suspension cylinder is approximately 148 kg (325 lb).
Remove valve assemblies (5) and the O-ring seals from cylinder assembly (4) .
Remove plug (3) , poppet (2) , and valve (1) from cylinder assembly (4) .
Remove bolts (6) from head (7) .
Put identification on head (7) and cylinder assembly (4) for assembly purposes.
Use Tooling (A) in order to separate cylinder assembly (4) from rod assembly (8) .
Remove wear ring (9) , plate (10) , and ball (11) from rod assembly (8) .
Remove rod assembly (8) from Tooling (A) . Remove head (7) from rod assembly (8) .
Remove O-ring seal (12) and ring (13) from head (7) . Remove U-cup seal (14) and lip seal (15) from head (7) .
Remove lockrings (16) from the head end of cylinder assembly (4) .
Use a suitable press to remove bearing (17) from the head end of cylinder assembly (4) .
Remove lockrings (18) from the rod assembly (8) .
Use a suitable press to remove bearing (19) from the rod assembly (8) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 152-4250 Hydraulic Cylinder Repair Stand 1 Start By:
Remove the rear suspension cylinder.
In order to prevent possible personal injury, remove the nitrogen charge before the disassembly of the front suspension cylinder.
High pressure cylinder. Do not remove any parts until pressure has been relieved or personal injury may occur.
Ensure that the nitrogen has been discharged from the suspension cylinder. Refer to Special Instruction, REHS4445, "Servicing the Suspension Cylinders for Off-Highway Trucks".
Illustration 1 g01419760
Position a suitable container below the rear suspension cylinder. Drain any remaining hydraulic oil from the rear suspension cylinder into a suitable container for disposal or storage.
In order to prevent possible personal injury, use a suitable fixture to support the weight of the suspension cylinder. Do not attempt to stand the suspension cylinder on end without the use of a suitable support. Failure to use a suitable support fixture could result in injury or death to personnel in this area.
Position the rear suspension cylinder in Tooling (A) . The weight of the rear suspension cylinder is approximately 148 kg (325 lb).
Remove valve assemblies (5) and the O-ring seals from cylinder assembly (4) .
Remove plug (3) , poppet (2) , and valve (1) from cylinder assembly (4) .
Remove bolts (6) from head (7) .
Put identification on head (7) and cylinder assembly (4) for assembly purposes.
Use Tooling (A) in order to separate cylinder assembly (4) from rod assembly (8) .
Remove wear ring (9) , plate (10) , and ball (11) from rod assembly (8) .
Remove rod assembly (8) from Tooling (A) . Remove head (7) from rod assembly (8) .
Remove O-ring seal (12) and ring (13) from head (7) . Remove U-cup seal (14) and lip seal (15) from head (7) .
Remove lockrings (16) from the head end of cylinder assembly (4) .
Use a suitable press to remove bearing (17) from the head end of cylinder assembly (4) .
Remove lockrings (18) from the rod assembly (8) .
Use a suitable press to remove bearing (19) from the rod assembly (8) .
Cat SIS web machinery list:
Parts tube Caterpillar catalog:
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, ...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120B, 12F, 140B, 215, 225, 3192, 3304, 518, 561C, 561D, 594H, 621B, 621E, 621F, 621G, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 641B, 650B, 651E, 657E, 920, 930, 941, 950B, 950B/950E, 951B, 955K...
613C II, 615C, 69D, 7271, 769C, 773B, 776, 777, 777B, 834B, 834G, 834H, 836G, 836H, 936, 936F, 950, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 960F, 966C, 966G, 966H, 966R, AD55, CX31-C9I, D400, D...
3408C, 3412, 3412C, 3412E, 3512, 631D, 637D, 639D, 69D, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773G, 773G OEM, 775B, 775G, 775G OEM, 777G, 834B, 836, 844K, 854K, 988B, 990, 990K, 992C, 992D, 992K, ...
G3512, G3516
120H, 135H, 30/30, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D ...
14E, 30/30, 572G, 611, 615, 615C, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637E, 69D, 735, 735B, ...
627G, 627H, 627K LRC, 637D, 637E, 637G, 973C, 973D, C-9, C9, CX31-C9I, D6R, D6R II, D6R III, D6R STD, D6T, D7E, D7R XR, TH31-E61
365C, 365C L, 365C L MH, 374D L, 374F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 637D, 651B, 657E, 657G, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 98...
4366176
TUBE AS-FUEL
C140-16
C140-16
3864234
TUBE AS-FUEL
C140-16
C140-16
4458682
TUBE AS-FUEL
C140-16
C140-16
4360098
TUBE AS-FUEL
C140-16
C140-16
4360082
TUBE AS-FUEL
C140-16
C140-16
4360081
TUBE AS-FUEL
C140-16
C140-16