TUBE AS 1371838 - Caterpillar

Table 1
New Part Number Description Quantity
505-8881 Engine Software 1
9S-8002 Plug 1
9S-8005 Plug 1
214-7566 O-Ring Seal 1
238-5080 O-Ring Seal 1
Table 2
Effective Engine Serial Numbers
S/N:SYE10820-UP Note: Failure to complete all the steps described in this service magazine may be considered tampering in violation of applicable law.Note: The following rework procedure is required for use with the new software.Rework Procedure
Illustration 1 g06021151
Remove tube assembly (1).
Remove elbow assemblies at location (2) and location (3).
Install the 9S-8002 Plug with 214-7566 O-Ring Seal to the open port at location (2).
Torque the plug at location (2) to 50 7 N m (37 5 lb ft).
Install the 9S-8005 Plug with 238-5080 O-Ring Seal to the open port at location (3).
Torque the plug at location (3) to 16 4 N m (12 3 lb ft).