TUBE AS 1383657 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0808     Multipurpose Grease     1    Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01324508
Install 14 springs (9) in parking brake housing (4) .
Lubricate O-ring seal (8) with Tooling (A). Install O-ring seal (8) into parking brake housing (4) .
Illustration 2 g01206859
Install piston (3) in position over the springs.
Lubricate O-ring seal (7) with Tooling (A). Install O-ring seal (7) in position on the parking brake housing.
Illustration 3 g01206858
Lubricate seal ring (5) with Tooling (A). Install seal ring (5) in piston retainer (1) .
Lubricate O-ring seal (6) with Tooling (A). Install O-ring (6) .
Illustration 4 g01206857
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retainer (1) over piston (3). Install two socket head bolts (2). Tighten socket head bolts (2) evenly in order to compress the springs.
When retainer (1) is seated on parking brake housing (4) tighten socket head bolts (2) to a torque of 100 20 N m (75 15 lb ft).End By: Install the parking brake. Refer to Disassembly and Assembly , "Parking Brake - Install".