TUBE AS 1803537 - Caterpillar

Installation Procedure
1. Use Dimension A, 20 3 mm (0.8 0.12 in) and Dimension B, 537 3 mm (21.2 .12 in) to determine proper weld location of 2M-6025 Plate (11). Refer to Illustration 2.2. Remove paint and surface irregularities from frame assembly at weld location of 2M-6025 Plate.3. Weld (W1) 2M-6025 Plate onto frame assembly with 1.5 mm square groove over 6 mm fillet weld, both sides.4. Install 9M-0164 Clamp (4), 8C-3364 Elbow (6), 7M-8485 Seal (7) and 105-0381 Base (9) to 136-6202 Cleaner Assembly (5).5. Install 136-6202 Cleaner Assembly to 2M-6025 Plate (11) with two 8T-4896 Washers (1) and two 8T-9101 Bolts (8).6. If applicable, replace former 6G-7181 Plate with 154-8455 Plate (10). Use dimension C, 12.5 1.5 mm (0.49 0.060 in); (W2) 3 mm fillet all around; (W3) 5 mm fillet, 25 mm - 125 mm length, 2 angles to determine proper weld location of 154-8455 plate.7. Install 6V-8400 Seal (3) and 145-2817 Hose Assembly (2).8. Remove paint and surface irregularities from work area. 9. Prime and paint work area.
Illustration 1.
View of machine frame assembly at fuel tank.(2) 145-2817 Hose Assembly.(3) 6V-8400 Seal. (4) 9M-0164 Clamp.(5) 136-6202 Cleaner Assembly.
Illustration 2. (A) 20 3 mm (0.8 0.12 in). (B) 537 3 mm (21.2 .12 in). (1) 8T-4896 Washer.(6) 8C-3364 Elbow.(7) 7M-8485 Seal.(8) 8T-9101 Bolt.(9) 105-0381 Base.(11) 2M-6025 Plate.(W1) 1.5 mm square groove over 6 mm fillet weld, both sides.
Illustration 3.(10) 154-8455 Plate.(C) 12.5 1.5 mm (0.49 0.060 in). (W2) 3 mm fillet weld, all around.(W3) 5 fillet weld, 25 mm - 125 mm length, 2 angles.