TUBE AS 1859816 - Caterpillar

Illustration 4 g03813325
Operator Display
(1) Home screen
(2) Water control screen
(3) Manual icon
(4) Water spray ON/OFF icon
(5) Water control icon
(6) Settings screen
(7) Spray mode screen
(8) Settings icon When water control icon (5) on the "Home" screen (1) is touched, the "Water Control" screen (2) is visible. When the operator touches the "Settings" icon (8), the "Settings" screen (6) is visible. The available settings are "Spray Mode" and "Nozzles".When "Spray Mode" is selected from the menu, the "Spray Mode" screen (7) is visible. This screen allows the operator to enter the desired water spray mode to be adjusted. The available spray modes are "Manual" and "Auto". Icon (3) indicates if the water spray system is operating in the AUTO or MANUAL mode.Note: The water spray system default spray mode setting is the MANUAL mode. When the spray mode setting is changed, the setting remains in effect until changed again, regardless of cycles of the engine start switch. Note: When operating in MANUAL mode with the flow rate set, the system will sprays at the set rate regardless of machine speed or nozzle setting.Note: When operating in the AUTOMATIC mode, the application rate determines the amount of additive per square meter/yard. In the AUTOMATIC mode, the flow rate is a product of the following formula:
Application Rate x Machine Speed x Spray Bar Width = Flow RateFlow Rate
Illustration 5 g03813326
Flow Rate Adjustments
(1) Home screen
(2) Water control icon
(3) Manual icon
(4) Keypad icon
(5) Water control screen
(6) Manual flow rate adjustment
(7) Flow rate screen
(8) Flow rate adjustment keypad
(9) OK icon
(10) Back icon The "Water Control" screen (5) allows the operator to make flow rate adjustment (6) while operating in MANUAL mode. When water control icon (2) on the "Home" screen (1) is selected, the "Water Control" screen is displayed. The default spray mode setting for the spray system is the MANUAL mode. Icon (3) indicates current operating mode of the system.To increase the flow rate number, the operator must touch the "+" symbol at the right end of the "Flow Rate" increment/decrement bar. The operator must touch the "-" symbol on the bar to decrease the flow rate number.Note: The "Flow Rate" increment/decrement bar appears on the screen when spray mode is set to the MANUAL mode. The bar displays the desired flow rate in either gallons per minute or liters per minuteA second method of changing the flow rate is to use the "Keypad" icon (4) to access the "Flow Rate" screen (7). When the "Keypad" icon is touched, flow rate adjustment keypad (8) is visible. In this case, the operator enters the desired "Flow Rate" number on the keypad. The operator must touch the "OK" icon (9) to set the desired flow rate. The operator must touch the "Back" icon (10) to return to the previous menu. Note: If the entered number is outside the acceptable range, "***" is shown. If this string is displayed, the operator must re-enter the desired value within the acceptable range and touch the "OK" icon (9). The newly entered number