TUBE AS 1869742 - Caterpillar

Transmission Hydraulic Control Valve
Illustration 1 g01276532
(1) Torque for nuts ... 60 12 N m (44 9 lb ft) (2) Coat the bore for the seal with 7M-7260 Liquid Gasket prior to installing the lip seal. Allow the liquid gasket dry. Do not apply gasket material to the case of the lip seal. (3) Lightly lubricate the lip of the seal with the lubricant that is being sealed. (4) Torque for nuts ... 34 4 N m (25 3 lb ft) (5) Torque for the three mounting bolts ... 48 4 N m (35 3 lb ft)Selector Valve Gp
Illustration 2 g01276529
(6) Torque for nuts ... 34 7 N m (25 5 lb ft) (7) Torque for the three mounting bolts ... 48 4 N m (35 3 lb ft)Pressure Control Valve
Illustration 3 g01276528
(8) 9P-4213 Spring (red stripe)First test Length under test force ... 91.44 mm (3.6 inch) Test force ... 130 N (29 lb)Second test Length under test force ... 73.66 mm (2.9 inch) Test force ... 396 20 N (89 4.5 lb) Free length after test ... 97.54 mm (3.84 inch) Outside diameter ... 18.26 mm (0.72 inch) (9) 5M-7915 Spacer Thickness of one spacer ... 0.9 mm (0.035 inch) Outside diameter ... 17.48 0.25 mm (0.7 0.001 inch) The amount of pressure change from one spacer ... 75 kPa (11 psi) (10) Use 5M-7914 Spacer, as required. Thickness of one spacer ... 0.25 mm (0.001 inch) Outside diameter ... 17.48 0.25 mm (0.7 0.001 inch) The amount of pressure change from one spacer ... 20 kPa (3 psi) (11) Use 6J-6517 Shim, as required. 6J-6517 Shim must not be positioned next to 9P-4213 Spring . Thickness of one shim ... 0.12 mm (0.0047 inch) Outside diameter ... 15.88 0.13 mm (0.625 0.005 inch) (12) Install the dowels so that the dowels are below the surface of each face of the valve body. Do not install the dowels into the inside diameter of the retainer. (13) 8M-8132 Spring (red stripe) Length under test force ... 56.64 mm (2.23 inch) Test force ... 192 15.6 N (43.2 3.5 lb) Free length after test ... 89 mm (3.5 inch) Outside diameter ... 17.8 mm (0.7 inch) (14) 9H-2367 Spring Length under test force ... 23.83 mm (0.938 inch) Test force ... 1.5 0.1 N (0.34 0.02 lb) Free length after test ... 29.36 mm (1.156 inch) Outside diameter ... 8.74 mm (0.344 inch) (15) Torque for the seven bolts ... 48 7 N m (35 5 lb ft)