TUBE AS 1948106 - Caterpillar

Insert one o-ring (8) in the o-ring groove of flange (4). Attach tube assembly (5) to elbow (9) using two bolts (6) and two washers (7) .
Illustration 12 g03040300
(10) 6V-7970 O-Ring Seal (11) 8C-4424 Plug
Install one o-ring (10) on to plug (11). Install plug (11) into tube assembly (5) .
Illustration 13 g03040357
(12) 322-7284 Bracket (13) 322-7282 Flange (14) 6V-1820 Bolt (15) 198-4766 Hard Washer
Attach brackets (12) to flange (13) using four bolts (14) and four washers (15) per bracket. Leave bolts (14) loose until all flange bolts are torqued.
Illustration 14 g03040417
(1) 344-9288 Flange (2) 344-9286 Ring (3) 259-4600 O-Ring Seal (7) 6V-5839 Washer (13) 322-7282 Flange (16) 6V-5842 Bolt
Install one flange (1), one ring (2), and one o-ring (3). Lubricate o-ring (3) with clean engine oil.
Press flange assembly (13) on to tube (5). Attach flange (1) to flange (13) using two bolts (16) and two washers (7) .
Illustration 15 g03040536
(13) 322-7282 Flange (14) 6V-1820 Bolt (15) 198-4766 Hard Washer
Attach flange assembly (13) to the engine oil pan using four bolts (14) and four washers (15). Leave bolts (14) loose until all bolted joints are torqued.
Illustration 16 g03040618
(1) 344-9288 Flange (2) 344-9286 Ring (3) 259-4600 O-Ring Seal (7) 6V-5839 Washer (13) 322-7282 Flange (16) 6V-5842 Bolt (17) 322-7342 Tube
Install one flange (1), one ring (2), and one o-ring (3) onto tube (17). Lubricate o-ring (3) with clean engine oil.
Press tube (17) into flange assembly (13). Attach flange (1) to flange assembly (13) using two bolts (16) and two washers (7) .
Illustration 17 g03041376
(1) 344-9288 Flange (2) 344-9286 Ring (3) 259-4600 O-Ring Seal (4) 129-9454 Flange (6) 6V-5815 Bolt (7) 6V-5839 Washer (8) 131-3718 O-Ring Seal (17) 322-7342 Tube (18) 308-7220 Elbow
Install one flange (1), one ring (2), and one o-ring (3) onto tube (17). Lubricate o-ring (3) with clean engine oil.
Press flange (4) on to tube (17), insert o-ring (8) in to o-ring groove of flange (4). Attach the assembled tube (17) to elbow (18) using two bolts (6) and two washers (7) .
Apply final torque only in this order to ensure proper alignment and to reduce assembly stress:
Torque bolts (16) refer to illustrations 14 and 16.
Torque bolts (6) refer to illustration 17.
Illustration 18 g03041517
Ensure proper clearance between the tube and oil filter brackets. Refer to illustration 18.
Torque bolts (6) refer to illustration 11.
Torque all support bracket bolts, refer to illustrations 13 and 15.