TUBE 1M2676 - Caterpillar

Excavator AllMachine Control and Guidance ProductsTERRAIN GRADING (S/N: TFE1-UP)TERRAIN LOADING (S/N: TFL1-UP)TERRAIN OFFICE (S/N: TER1-UP)Introduction
This Special Instruction provides information for installing the following Cat® Terrain v6.0 for grading and loading hardware components on the listed excavators:
389-0324 Terrain Installation Gp
389-0345 Electronics GpThe installation requires welding, cutting holes, using electrical tools, and using mechanical tools.The installation includes the following procedures:
Receiver installation
Angle sensor installations
Pressure switch installation
Machine radio installation
Display module installation
Battery backup installation
Harness installations
Optional alarm installation
Calibration and measure-up proceduresAfter a technician has completed the first installation process, future installations will require less time to complete.Operation and Maintenance Manual
The operation of Terrain for grading and loading on-board software is covered in the Operation and Maintenance Manual, M0078762, "Cat® Terrain v6.0 for Grading and Loading". Refer to this manual for more information.Open the 392-9004 USB Memory Module containing the Terrain operational files and documentation.Print the Operation and Maintenance Manual of the desired language and secure the manual in the cab of the machine.Safety Section
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly.Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive.When a tool, procedure, work method, or operating technique that Caterpillar does not recommend is used, ensure that you and others are safe during use. Also, ensure that the product will not be damaged or made unsafe by the operation, lubrication, maintenance, or repair procedures that are used.
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Electrocution Hazard! Keep the machine and attachments a safe distance from electrical power. Stay clear 3 m (10 ft) plus twice the line insulator length. Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions and warnings will cause serious injury or death
Machine swings. Stay back. Crushing hazard could cause serious injury or death.