TUBE AS-OIL SUPPLY 1N3537 - Caterpillar

Personal injury can result from rotating and moving parts. Stay clear of all rotating and moving parts.Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified.The machine must be parked on a level surface and the engine stopped.Attach a "Do Not Operate" or similar warning tag to the start switch and controls before servicing, repairing, or making adjustments to the machine.
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Table 1
Required Tools    
Tool     Part No     Description     Qty    
A     N/A     Laptop Computer with Cat ET Software     1    
B (1)     317-7485     Communication Adapter (CA3)     1    
C (1)     327-8981     Cable As (CA3 / Datalink Cable Assembly)     1    
D (1)     370-4617     Cable As (CA3 / PC Cable Assembly)     1    
( 1 ) Tool (B), Tool (C), and Tool (D) are part of 317-7484 Communication Adapter Gp (III).
Drive the machine to a smooth, horizontal surface.
Illustration 1 g02860817
Move propel lever (1) to the NEUTRAL position.
Move parking brake switch (2) to the ON position.
Illustration 2 g02860818
Use throttle control switch (3) in order to operate the engine in ECO mode or in low idle.Note: Two things indicate when the engine is in ECO mode. First, "ECO" will appear on the display. Second, the second LED next to throttle control switch (3) will be illuminated. Two things indicate when the engine is at low idle. First, "Low Idle" will appear on the display. Second, the first LED next to the throttle control switch will be illuminated.
Illustration 3 g02860820
Move engine start switch (4) to the OFF position.
Illustration 4 g02860822
Remove fuse panel cover (5) .
Assemble the tooling. Connect Tool (B) to Tool (C). Connect Tool (C) to Tool (D) .
Illustration 5 g02860824
Connect Tool (D) to diagnostic connector (8). Connect Tool (B) to USB port on Tool (A) .
Move engine start switch (4) to the START position. Release the switch when the engine starts.
Use throttle control switch (3) in order to operate the engine in ECO mode or in low idle.Note: Two things indicate when the engine is in ECO mode. First, "ECO" will appear on the display. Second, the second LED next to throttle control switch (3) will be illuminated. Two things indicate when the engine is at low idle. First, "Low Idle" will appear on the display. Second, the first LED next to the throttle control switch will be illuminated.
Launch the Cat ET program on the computer.
Select "Configurations", select "C.4.4 Industrial Engine", select "Fan Control", select "Cooling Fan Solenoid Minimum Current". Note: The "Engine Cooling Fan Solenoid Minimum Current" and the "Engine Cooling Fan Solenoid Maximum Current" must be set to an equal low amperage and to an