TUBE AS 2013225 - Caterpillar

Illustration 1 g02018615Note: Completely fill all cavities of the bucket control linkage with grease when you initially install a bucket.
Apply lubricant through fittings for the linkages (1), (2), (3), and (4).
Apply lubricant through fittings for the bucket (5), (6), and (7). Continue to fill with grease until the grease is visible on both sides of the power link. Note: Service the above fittings after you operate the bucket under water.Installation of the Bucket
Use the procedure that follows when a bucket is changed. Use the procedure that follows when a new pin is installed. Use the procedure that follows when new bearings are installed. Note: Fill the cavity of the stick nose with grease before you install the pin.
Insert the pin into the stick nose.
Secure the bucket to the stick.
Apply grease through fitting (5).
Continue to fill with grease until the grease is visible on both sides of stick nose.
Apply lubricant through fittings for the bucket (6), and (7). Continue to fill with grease until the grease is visible on both sides of power link.