2057983 TUBE AS. Caterpillar parts
Alternative (cross code) number:
Disconnect hose assembly (11) from the head end of the lift cylinder.
Illustration 11 g00537827
Position a suitable container under hose assemblies (12) , (13) , and (14) . Disconnect hose assemblies (12) , (13) , and (14) .
Illustration 12 g00537831
Remove bolt (15) , the washers, and the nut.
Illustration 13 g00537832
Apply Tooling (F) to the threads of Tooling (A) . Install Tooling (A) . Remove collet (16) .
Illustration 14 g00537834
Apply Tooling (F) to the threads of Tooling (A) . Install Tooling (A) . Remove collet (17) .Note: If the pin is free, the pin may be forced out of the bore by the forcing bolts at this time.
Illustration 15 g00537838
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Note: Do NOT use non-hardened, threaded rods with Hydraulic Cylinders as Tooling.