2194018 TUBE AS Caterpillar parts
330C
Rating:
Alternative (cross code) number:
CA2194018
219-4018
2194018
CA2194018
219-4018
2194018
EXCAVATOR,
Compatible equipment models: 2194018:
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
In order to remove the connecting rod caps, rotate the crankshaft in a clockwise direction until the piston is at the bottom center position.
Illustration 1 g01001625
Inspect connecting rod (1) and connecting rod cap (4) for the proper identification mark.Note: The connecting rod and the connecting rod cap should have matching Numbers (X) on the side. Mark the connecting rod and the connecting rod cap, if necessary.
Remove nuts (6) from connecting rod bolts (2). Remove connecting rod cap (4). Remove lower connecting rod bearing (5) from connecting rod cap (4) .
Carefully push connecting rod (1) into the cylinder bore. Remove upper connecting rod bearing (3) from connecting rod (1) .
Repeat Steps 1 through 4 for the remaining connecting rod bearings.
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
In order to remove the connecting rod caps, rotate the crankshaft in a clockwise direction until the piston is at the bottom center position.
Illustration 1 g01001625
Inspect connecting rod (1) and connecting rod cap (4) for the proper identification mark.Note: The connecting rod and the connecting rod cap should have matching Numbers (X) on the side. Mark the connecting rod and the connecting rod cap, if necessary.
Remove nuts (6) from connecting rod bolts (2). Remove connecting rod cap (4). Remove lower connecting rod bearing (5) from connecting rod cap (4) .
Carefully push connecting rod (1) into the cylinder bore. Remove upper connecting rod bearing (3) from connecting rod (1) .
Repeat Steps 1 through 4 for the remaining connecting rod bearings.
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
12H, 140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521...
12H, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 340D L, 627G, 637D, 637G, 973C, 973D, C-9, C9, D6R II, M330D, MTC735, TK711, TK721, TK722, TK732, T...
12H, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 627G, 637D, 637G, 973C, 973D, C-9, D6R II, M330D, MTC735, TK711, TK721, TK722, TK732, TK741, TK751, TK752
305.5, 306, 306E, 307B, 307C, 307D, 308C, 311C, 312C, 312C L, 314C, 315C, 318C, 319C, 320B, 320C, 320C FM, 321C, 322B L, 322C, 325C, 330B L, 330C, 330C L, 330C MH, 345B II, 345B II MH, 345C, 345C L, 3...
2164642
TUBE AS
325C, 330C, 330C L, 330D L, 330D LN
325C, 330C, 330C L, 330D L, 330D LN
2296864
TUBE AS
330C, 330C L, 330D L, 330D LN, 336D L
330C, 330C L, 330D L, 330D LN, 336D L
1936663
TUBE AS
330C, 330C L
330C, 330C L
2543485
TUBE AS
330C, 330C L
330C, 330C L
2218425
TUBE AS
330C, 330D L, 336D L
330C, 330D L, 336D L
2513527
TUBE AS
325C, 325D L
325C, 325D L
2513526
TUBE AS
325C, 325D L
325C, 325D L
2697992
TUBE AS
325C
325C
2697991
TUBE AS
325C
325C
2494597
TUBE AS
325C
325C
2494596
TUBE AS
325C
325C
2194024
TUBE AS
330C, 330D L
330C, 330D L
2194023
TUBE AS
330C
330C
2194022
TUBE AS
330C
330C
2194021
TUBE AS
330C
330C
2194020
TUBE AS
330C
330C
2194019
TUBE AS
330C
330C