TUBE AS 2307123 - Caterpillar

Illustration 1 g02617582
Table 1
Specification for 6V-0889 Electric Starting Motor Gp and 6V-0513 Electric Starting Motor Gp
Item Qty Part Specification Description
1 2 6V-8188 Nut Torque to 30.5 3.5 N m (269.9 31.0 lb in).
2 1 4B-2049 Nut Torque to 2.25 0.25 N m (19.91 2.21 lb in).
3 1 4B-2049 Nut The switch terminal must be insulated with heat shrinkable tubing. Do not use molded terminals.
Torque to 2.25 0.25 N m (19.91 2.21 lb in).
4 1 6V-8188 Nut Torque to 30.5 3.5 N m (269.9 31.0 lb in).
5 1 6V-8188 Nut A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
6 2 6V-8188 Nut Torque to 30.5 3.5 N m (269.9 31.0 lb in).
B - - Clearance between the pinion and the housing is 9.1 mm (0.36 inch).
- - - Pull-in current at 20 V and 25 °C (77 °F) is 49.3 3.3 Amp.
Hold-in current at 20 V and 25 °C (77 °F) is 6.8 Amp max.
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.