2445840 TUBE AS Caterpillar parts
330C
Rating:
Alternative (cross code) number:
CA2445840
244-5840
2445840
CA2445840
244-5840
2445840
EXCAVATOR,
Compatible equipment models: 2445840:
Number on catalog scheme:
10
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure - Remove and Install".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01003958
Loosen clamp (1) from muffler (2) .
Illustration 2 g01003959
Remove bolts (3) from muffler (2) .
Illustration 3 g01003961
Remove bolts (4) from muffler (2). Use two people or a suitable lifting device in order to remove muffler (2). The weight of muffler (2) is approximately 25 kg (55 lb).Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 4 g01003961
Use two people or a suitable lifting device in order to install muffler (2). The weight of muffler (2) is approximately 25 kg (55 lb). Install muffler (2) and bolts (4).
Illustration 5 g01003959
Install bolts (3) on muffler (2) .
Illustration 6 g01003958
Tighten clamp (1) on muffler (2) .End By: Install the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure - Remove and Install".
Start By:
Remove the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure - Remove and Install".Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01003958
Loosen clamp (1) from muffler (2) .
Illustration 2 g01003959
Remove bolts (3) from muffler (2) .
Illustration 3 g01003961
Remove bolts (4) from muffler (2). Use two people or a suitable lifting device in order to remove muffler (2). The weight of muffler (2) is approximately 25 kg (55 lb).Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 4 g01003961
Use two people or a suitable lifting device in order to install muffler (2). The weight of muffler (2) is approximately 25 kg (55 lb). Install muffler (2) and bolts (4).
Illustration 5 g01003959
Install bolts (3) on muffler (2) .
Illustration 6 g01003958
Tighten clamp (1) on muffler (2) .End By: Install the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure - Remove and Install".
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
12H, 140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521...
12H, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 340D L, 627G, 637D, 637G, 973C, 973D, C-9, C9, D6R II, M330D, MTC735, TK711, TK721, TK722, TK732, T...
12H, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 627G, 637D, 637G, 973C, 973D, C-9, D6R II, M330D, MTC735, TK711, TK721, TK722, TK732, TK741, TK751, TK752
305.5, 306, 306E, 307B, 307C, 307D, 308C, 311C, 312C, 312C L, 314C, 315C, 318C, 319C, 320B, 320C, 320C FM, 321C, 322B L, 322C, 325C, 330B L, 330C, 330C L, 330C MH, 345B II, 345B II MH, 345C, 345C L, 3...
2164642
TUBE AS
325C, 330C, 330C L, 330D L, 330D LN
325C, 330C, 330C L, 330D L, 330D LN
2296864
TUBE AS
330C, 330C L, 330D L, 330D LN, 336D L
330C, 330C L, 330D L, 330D LN, 336D L
1936663
TUBE AS
330C, 330C L
330C, 330C L
2543485
TUBE AS
330C, 330C L
330C, 330C L
2218425
TUBE AS
330C, 330D L, 336D L
330C, 330D L, 336D L
2445582
TUBE AS
330C
330C
2445580
TUBE AS
330C
330C
2335508
TUBE AS
330C
330C
2283560
TUBE AS
330C
330C
2283563
TUBE AS
330C
330C
2283562
TUBE AS
330C
330C
2445846
TUBE AS
330C
330C
2445845
TUBE AS
330C
330C
2445844
TUBE AS
330C
330C
2445843
TUBE AS
330C
330C
2445842
TUBE AS
330C
330C
2445841
TUBE AS
330C
330C