TUBE AS 2452184 - Caterpillar

Separation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Pin
76.2 mm (3.0 inch) by
63.5 mm (2.5 inch)     1    
B     1P-3532     Track Block Assembly     1    
C     260-9412     Lifting Device     1    
D     1U-9202     Lever Puller Hoist     1    
Illustration 1 g01099092
Remove bolts (1) and (2) in order to remove guard assemblies (3) .
Illustration 2 g01105748
Remove bolts (4) and cover assembly (5) .
Illustration 3 g01105754
Loosen valve (6) .
Position Tooling (A). Start the machine and move the machine backward. This will loosen the track. Remove Tooling (A) .
Illustration 4 g01099179
Move the machine until the center of master link (7) is on the centerline of the final drive.
Illustration 5 g01099185
Illustration 6 g01099211
Position Tooling (B) to the lower section of track assembly (8). Attach Tooling (C) to the lower section of track assembly (8) .
Remove bolts (9) and master shoe (10). Lower track assembly (8) to Tooling (B) .
Illustration 7 g01099220
Attach Tooling (C) and Tooling (D) to track assembly (8). .