AVSPARE.COM
parts catalog

TUBE AS 2500979 - Caterpillar



2500979 TUBE AS Caterpillar parts TUBE
Rating:
86
Alternative (cross code) number:
CA2500979
250-0979
2500979
Caterpillar 2500979 TUBE AS

Buy TUBE AS 2500979 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Illustration 2 g03863849
Clean the mating surfaces free of wax, dirt, debris, paint, and grease. Select two wheel adapters with matching pair identifiers for one side of the machine.
Install two wheel adapters (1) to the front axle using 50 washers (2) and 50 nuts (3). Tighten to 3100 350 N m (2286 258 lb ft).Note: Do not apply any lubricants to the faces of the washers and the threads of the bolts.
Repeat Steps 1 and 2 for the other front wheel.
Illustration 3 g03863921
Use a suitable lifting device to remove two 308-3083 Adapter As (A), 48 201-4606 Bolts (B), and 48 217-9903 Washers (C) from the right side of the rear axle.Note: 308-3083 Adapter As (A) weighs approximately 224 kg (494 lb).
Repeat Step 4 for the right side of the rear axle.
Illustration 4 g03863958
Use a suitable tire handler to install a tire and demountable rim group (4) on both sides of the front axle. Secure each tire and demountable rim group (4) using 54 bolts (5) and 54 hard washers (6). Tighten bolts (5) to 3100 350 N m (2286 258 lb ft). Refer to Testing and Adjusting, UENR2267, "Front Wheel - Align" to align the front wheels.Note: The approximate weight of the demountable rim group (4) ( 2463 kg (5430 lb)) does not include the weight of the selected tire. Add the weight of the selected tire for safe lifting and mounting.
Illustration 5 g06242690
A view of the right rear axle
Use a suitable tire handler to install a tire and demountable rim group (4) on the two inboard rear axle positions. Secure each tire and demountable rim group (4) using 54 nuts (3) and 54 hard washers (6). Tighten nuts (3) to 3100 350 N m (2286 258 lb ft).Note: The approximate weight of the demountable rim group (4) ( 2463 kg (5430 lb)) does not include the weight of the selected tire. Add the weight of the selected tire for safe lifting and mounting.
Install a tire valve group (7) to each demountable rim group (4) using six reducer bushings (8), six angles (9), two locknuts (10), six seals (11), and six diffusers (16).
Install one guard (12) with four bolts (13) and four washers (14) on each side. Use four bolts (17) ,and four hard washers (18) to install one support (15) to each side of the rear axle. Route tire valve group (7) under guard (12) and into support (15) on each side.
Illustration 6 g03863921
Clean the mating surfaces free of wax, dirt, debris, paint, and grease.
Use a suitable lifting device to install two adapter assemblies (A), 48 bolts (B), and 48 washers (C) to the right side of the rear axle. The two adapter assemblies (A) must be assembled so that the inboard tire valve group (7) will pass through the cutout in the adapter assemblies (A). Further more, the gaps at the ends of the adapter assemblies (A) must be equal on each side to insure proper rim fit up. Use M12


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.