2502715 TUBE AS Caterpillar parts
325C
Rating:
Alternative (cross code) number:
CA2502715
250-2715
2502715
CA2502715
250-2715
2502715
EXCAVATOR,
Compatible equipment models: 2502715:
Information:
Checking Before Start-Up
Check the battery charger for proper operation. If the batteries are properly charged, the needle of the ammeter will register near "0" (zero).The battery charger must not produce excessive current during start-up. Alternatively, the charger must be automatically disconnected for start-up. If the engine has an alternator, the charger must be automatically disconnected during start-up and during engine operation.Charging the Battery
Never disconnect any charging unit circuit or battery circuit cable from the battery when the charging unit is operated. A spark can cause an explosion from the flammable vapor mixture of hydrogen and oxygen that is released from the electrolyte through the battery outlets. Injury to personnel can be the result.
Perform the following procedure to charge the battery:
Ensure that the charger is turned OFF.
Adjust the voltage of the charger in order to match the voltage of the battery.
Connect the POSITIVE "+" lead of the charger to the POSITIVE "+" battery terminal. Connect the NEGATIVE "-" lead of the charger to the NEGATIVE "-" battery terminal.
Turn ON the battery charger. Overcharging of Batteries
Overcharging reduces the service life of batteries. Use a battery charger that will not overcharge the battery. DO NOT charge the battery if the meter of the battery charger is in the RED zone.Overcharging is indicated by the following symptoms:
The battery is very warm to the touch.
A strong odor of acid is present.
The battery emits smoke or a dense vapor (gas).Perform one of the following procedures if the battery shows symptoms of overcharging:
Reduce the rate of charging by a significant amount. Complete the charging at the reduced rate.
Turn OFF the charger.Table 1 describes the effects of overcharging on different types of batteries.
Table 1
Effects of Overcharging Batteries
Type of Battery Effect
Caterpillar General Service Batteries
Caterpillar Premium High Output Batteries All of the battery cells have a low level of electrolyte.
When the plates of the battery are inspected through the filler holes, the plates may appear to be warped. This is caused by an excessive temperature.
The battery may not pass a load test.
Caterpillar Maintenance Free Batteries The battery may not accept a charging current.
The battery may not pass a load test. Checking After Stopping
Ensure that the battery charger is connected properly. Observe the meter of the charger. Record the amperage.
Check the battery charger for proper operation. If the batteries are properly charged, the needle of the ammeter will register near "0" (zero).The battery charger must not produce excessive current during start-up. Alternatively, the charger must be automatically disconnected for start-up. If the engine has an alternator, the charger must be automatically disconnected during start-up and during engine operation.Charging the Battery
Never disconnect any charging unit circuit or battery circuit cable from the battery when the charging unit is operated. A spark can cause an explosion from the flammable vapor mixture of hydrogen and oxygen that is released from the electrolyte through the battery outlets. Injury to personnel can be the result.
Perform the following procedure to charge the battery:
Ensure that the charger is turned OFF.
Adjust the voltage of the charger in order to match the voltage of the battery.
Connect the POSITIVE "+" lead of the charger to the POSITIVE "+" battery terminal. Connect the NEGATIVE "-" lead of the charger to the NEGATIVE "-" battery terminal.
Turn ON the battery charger. Overcharging of Batteries
Overcharging reduces the service life of batteries. Use a battery charger that will not overcharge the battery. DO NOT charge the battery if the meter of the battery charger is in the RED zone.Overcharging is indicated by the following symptoms:
The battery is very warm to the touch.
A strong odor of acid is present.
The battery emits smoke or a dense vapor (gas).Perform one of the following procedures if the battery shows symptoms of overcharging:
Reduce the rate of charging by a significant amount. Complete the charging at the reduced rate.
Turn OFF the charger.Table 1 describes the effects of overcharging on different types of batteries.
Table 1
Effects of Overcharging Batteries
Type of Battery Effect
Caterpillar General Service Batteries
Caterpillar Premium High Output Batteries All of the battery cells have a low level of electrolyte.
When the plates of the battery are inspected through the filler holes, the plates may appear to be warped. This is caused by an excessive temperature.
The battery may not pass a load test.
Caterpillar Maintenance Free Batteries The battery may not accept a charging current.
The battery may not pass a load test. Checking After Stopping
Ensure that the battery charger is connected properly. Observe the meter of the charger. Record the amperage.
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
1355970
TUBE AS-PISTON COOLING JET
30/30, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 325C FM, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 570, 570B, 574, 580, 580B, 938G, 938G II, 950G, 950G II, 962G, 962G II, C7, D5N, D6N, DEUCE, IT38G,...
30/30, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 325C FM, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 570, 570B, 574, 580, 580B, 938G, 938G II, 950G, 950G II, 962G, 962G II, C7, D5N, D6N, DEUCE, IT38G,...
2473755
TUBE AS
120H, 135H, 3126B, 322C, 322C FM, 325C, 325C FM, 561N, 938G II, 950G II, 953C, 962G II, 963C, C7, D5N, D6N, IT38G II, IT62G II, M325C MH, SPP101
120H, 135H, 3126B, 322C, 322C FM, 325C, 325C FM, 561N, 938G II, 950G II, 953C, 962G II, 963C, C7, D5N, D6N, IT38G II, IT62G II, M325C MH, SPP101
7C5403
TUBE AS
120H, 135H, 30/30, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D ...
120H, 135H, 30/30, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D ...
2378526
TUBE
305.5, 306, 306E, 307B, 307C, 307D, 308C, 311C, 312C, 312C L, 314C, 315C, 318C, 319C, 320B, 320C, 320C FM, 321C, 322B L, 322C, 325C, 330B L, 330C, 330C L, 330C MH, 345B II, 345B II MH, 345C, 345C L, 3...
305.5, 306, 306E, 307B, 307C, 307D, 308C, 311C, 312C, 312C L, 314C, 315C, 318C, 319C, 320B, 320C, 320C FM, 321C, 322B L, 322C, 325C, 330B L, 330C, 330C L, 330C MH, 345B II, 345B II MH, 345C, 345C L, 3...
1426582
TUBE AS
320B, 320C, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E LN, 322B, 322B LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C,...
320B, 320C, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E LN, 322B, 322B LN, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C,...
2236989
TUBE GP-HYDRAULIC PUMP
322C, 325C
322C, 325C
2204604
TUBE AS
322C, 325C
322C, 325C
1876817
TUBE AS
325C, 325C FM, 325D, 325D FM, 325D L, 329D, 329D L, 329D LN
325C, 325C FM, 325D, 325D FM, 325D L, 329D, 329D L, 329D LN
1876820
TUBE AS
325C, 325C FM, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
325C, 325C FM, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN
2176259
TUBE AS
325C
325C
2418033
TUBE AS
325C
325C
2502085
TUBE AS
325C
325C
2502714
TUBE AS
325C
325C
2502713
TUBE AS
325C
325C
2502712
TUBE AS
325C
325C
2194027
TUBE AS
325C, 330C
325C, 330C
2502090
TUBE AS
325C
325C
2502089
TUBE AS
325C
325C
2492698
TUBE AS
325C
325C
2429334
TUBE AS
325C, 325D L
325C, 325D L
2429333
TUBE AS
325C, 325D L
325C, 325D L
2695096
TUBE AS
325C
325C
2695095
TUBE AS
325C
325C
2695094
TUBE AS
325C
325C