2600634 TUBE Caterpillar parts
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 450E, 953D, 963D, D3K XL, D4K XL, D5K LGP, D5...
Rating:
Alternative (cross code) number:
CA2600634
260-0634
2600634
CA2600634
260-0634
2600634
Weight: 0.20 pounds 0 kg.
Information:
ID
36
mm
MATERIAL THICKNESS
50
mm
OD
40
mm
BACKHOE LOADER, TRACK-TYPE TRACTOR,
Compatible equipment models: 2600634:
PIPELAYER
PL61
Information:
failure is recorded when the VIMS main module reads the voltage of the display data link and the voltage is above normal.
CHECKING THE DISPLAY MODULES
Disconnect the display modules from the machine harness one at a time and reconnect the display modules from the machine harness one at a time.
Check whether the fault CID 0819 FMI 03 is present. Expected Results: The fault CID 0819 FMI 03 remains.Results:
OK - Fault has not changed. Fault CID 0819 FMI 03 remains. Repeat this process for each module. Proceed to 2.
NOT OK - Failure is not displayed. Replace the module. STOP.
CHECK FOR SHORT TO +BATTERY
Turn the disconnect switch and the key start switch to the OFF position.
Disconnect the machine harness from the VIMS main module and the display modules.
At the machine harness connector for the VIMS main module, measure the resistance between +battery contact 1 and the display data link circuit connector contact 26, 27 or 28. Expected Results:The Resistance is greater than 5000 ohms.Results:
OK - Resistance is greater than 5000 ohms. The harness circuit resistance is correct. Proceed to 3.
NOT OK - Resistance is less than 5000 ohms. The machine harness is faulty. The display data link is shorted to the +battery circuit. Repair the machine harness or replace the machine harness.STOP.
CHECK FOR OPEN HARNESS
The disconnect switch remains in the OFF position and the key start switch remains in the OFF position.
All modules remain disconnected from the machine harness.
Check the continuity of the display data link circuits in the machine harness. Measure the resistance from the connector of the VIMS main module to the connector for each of the display modules.Expected Results: There is continuity.Results:
OK - Circuit has continuity. The display data link circuit in the machine harness is correct. The VIMS main module is faulty. Replace the VIMS module. Refer to the section Testing and Adjusting, "Module-Replace". STOP.
NOT OK - Circuit has NO continuity. The machine harness is faulty. The display data link circuit is open in the machine harness. Repair the machine harness or replace the machine harness. STOP.
CHECKING THE DISPLAY MODULES
Disconnect the display modules from the machine harness one at a time and reconnect the display modules from the machine harness one at a time.
Check whether the fault CID 0819 FMI 03 is present. Expected Results: The fault CID 0819 FMI 03 remains.Results:
OK - Fault has not changed. Fault CID 0819 FMI 03 remains. Repeat this process for each module. Proceed to 2.
NOT OK - Failure is not displayed. Replace the module. STOP.
CHECK FOR SHORT TO +BATTERY
Turn the disconnect switch and the key start switch to the OFF position.
Disconnect the machine harness from the VIMS main module and the display modules.
At the machine harness connector for the VIMS main module, measure the resistance between +battery contact 1 and the display data link circuit connector contact 26, 27 or 28. Expected Results:The Resistance is greater than 5000 ohms.Results:
OK - Resistance is greater than 5000 ohms. The harness circuit resistance is correct. Proceed to 3.
NOT OK - Resistance is less than 5000 ohms. The machine harness is faulty. The display data link is shorted to the +battery circuit. Repair the machine harness or replace the machine harness.STOP.
CHECK FOR OPEN HARNESS
The disconnect switch remains in the OFF position and the key start switch remains in the OFF position.
All modules remain disconnected from the machine harness.
Check the continuity of the display data link circuits in the machine harness. Measure the resistance from the connector of the VIMS main module to the connector for each of the display modules.Expected Results: There is continuity.Results:
OK - Circuit has continuity. The display data link circuit in the machine harness is correct. The VIMS main module is faulty. Replace the VIMS module. Refer to the section Testing and Adjusting, "Module-Replace". STOP.
NOT OK - Circuit has NO continuity. The machine harness is faulty. The display data link circuit is open in the machine harness. Repair the machine harness or replace the machine harness. STOP.
Cat SIS web machinery list:
Parts tube Caterpillar catalog:
2984542
TUBE AS
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M315D 2, M317D 2, SPF343C
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M315D 2, M317D 2, SPF343C
3373574
TUBE
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M317D 2
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M317D 2
3223745
TUBE
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M317D 2
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M317D 2
3223746
TUBE
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M317D 2
420E, 430E, 450E, 914G, AP555E, BG500E, C4.4, CB-54, CB-54B, CB-64, CP-44, CS-44, CS-54, CS-54B, CW-34, D3K XL, D4K XL, D5K LGP, IT14G, IT14G2, M313D, M315D, M317D 2
3368174
TUBE-FUEL INJECTION
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3368175
TUBE-FUEL INJECTION
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3368176
TUBE-FUEL INJECTION
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3368177
TUBE-FUEL INJECTION
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3368178
TUBE-FUEL INJECTION
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3368179
TUBE-FUEL INJECTION
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3368180
TUBE-FUEL INJECTION
120M, 12M, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, ...
120M, 12M, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, ...
3211270
TUBE-OIL
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
2560143
TUBE AS
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 450E
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 450E
2495046
TUBE AS
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E
6V2721
TUBE-HEAT SHRINK
349E L, 349E L VG, 349F L, 416E, 621H, 623H, 627H, AP-900B
349E L, 349E L VG, 349F L, 416E, 621H, 623H, 627H, AP-900B
2886951
TUBE AS
416D, 420D
416D, 420D
2375201
TUBE AS
420D, 428D, 430D, 432D, 442D
420D, 428D, 430D, 432D, 442D
2362144
TUBE AS
3054C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, 416E, 416F, 420D, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 914G, AP-300D, AP-650B, AP-800D,...
3054C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, 416E, 416F, 420D, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 914G, AP-300D, AP-650B, AP-800D,...
2302610
TUBE AS
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E
8T6885
TUBE-HEAT SHRINK
2470C, 2570C, 2670C, 2864C, 330C L, 414E, 416E, 416F, 420E, 420F, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F, 553C, 563C, 573C, 586C, 815F, 815F II, 816F, 816F ...
2470C, 2570C, 2670C, 2864C, 330C L, 414E, 416E, 416F, 420E, 420F, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F, 553C, 563C, 573C, 586C, 815F, 815F II, 816F, 816F ...
3190755
TUBE-CONVOLUTED
414E, 416E, 420E, 422E, 428E, 430E, 432E, 442E, 450E, 966M, 966M XE, 972M, 972M XE, 980M, 982M, M313D, M315D, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
414E, 416E, 420E, 422E, 428E, 430E, 432E, 442E, 450E, 966M, 966M XE, 972M, 972M XE, 980M, 982M, M313D, M315D, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
1355009
TUBE-HEAT SHRINK
120K, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C...
120K, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C...
2166892
TUBE AS
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E
2166891
TUBE AS
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E