TUBE AS 2748359 - Caterpillar

Table 1
Message    Event Type (Alarm-Red, Notice-Yellow, Log-Green)    UPS Status (AVR, Bypass, Discharge, No Change, Online, Shut down)    Description    Action    
!!ERROR!! DEADLINE TIMEOUT!!     A     B     The main control board has been reset from a frozen state.     Contact your service organization    
!!ERROR!! Memory Access Timeout!!     A     B     The main control board has detected a memory access problem.     Contact your service organization    
Autostart to Inverters On command received     L     B     (Service-level function) The UPS has received a request to run the inverters from the pre-charge circuit.     Service Function - No Action    
Autostart to Inverters On complete     L     B     (Service-level function) The DC bus has been pre-charged and the inverters are running off the pre-charge circuit. This function is used for commissioning and trouble-shooting.     Service Function - No Action    
Autostart to Pre-charge command received     L     B     (Service-level function) The UPS has received a request to precharge the DC bus.     Service Function - No Action    
Autostart to Pre-charge complete     L     B     (Service-level function) The DC bus has been pre-charged and the bus is at the passively rectified voltage. This function is used for commissioning and trouble-shooting.     Service Function - No Action    
*** Low 24V Supply Detected. ***     N     B     The main control board has detected a loss of 24Vdc control power.     Contact your service organization    
*** Resetting the APC Board ***     L, A     B     The main control board has been reset.     Service Function - No Action    
User Name Password Accepted, authorized for 30 minutes.     L     NC     An engineering level password has been accepted.     No Action    
<userName> Logged In, Engr/Mfg authorized for 30 minutes.     L     NC     A password has been accepted.     No Action    
1 Minute Input Current Overload, A: ___ percent B: ___ percent C: ___ percent     A     B     The input current has exceeded the UPSs 1 minute rating.     Reduce Load    
1 Minute KVA Overload ___._ percent rated KVA     A     B     The output KVA has exceeded the UPSs 1 minute overload rating.     Reduce Load    
1 Minute Output Current Overload, A: ___ percent B: ___ percent C: ___ percent     A     B     The output current has exceeded the UPSs 1 minute rating.     Reduce Load    
1 Minute Power Overload ___ percent rated KW     A     B     The load (KW) has exceeded the UPSs 1 minute rating.     Reduce Load    
1 Second Input Cur. Overld (in Bypass), A: ___ percent B: ___ percent C: ___ percent     A