2763607 TUBE AS Caterpillar parts
988G, 988H
Rating:
Alternative (cross code) number:
CA2763607
276-3607
2763607
CA2763607
276-3607
2763607
Weight: 0.91 pounds 0 kg.
WHEEL LOADER,
Number on catalog scheme:
4
For full view, you need register
Information:
TYPE="A" START="3">
At the harness connector for the ECM, measure the resistance from contact J2-59 (wire EL305-PU) to frame ground. Expected Result:The resistance is less than 5 ohms.Results:
YES - The resistance is less than 5 ohms. Proceed to Test Step 9.
NO - The resistance is greater than 5 ohms. The circuit is open.Repair: The machine harness or the interface control module has failed. Repair the machine harness or replace the machine harness. Repair the interface control module or replace the interface control module.STOPTest Step 9. CHECK THE HARNESS CIRCUIT OF RELAY 15
The machine harness remains disconnected from the ECM and relay 15 remains removed.
Connect a jumper wire between contacts 87 and 30 of the base for relay 15.
At the harness connector for the ECM, measure the resistance from contact J2-58 (wire EL307-WH) to frame ground. Expected Result:The resistance is less than 5 ohms.Results:
YES - The resistance is less than 5 ohms. Proceed to Test Step 10.
NO - The resistance is greater than 5 ohms. The circuit is open.Repair: The machine harness or the interface control module has failed. Repair the machine harness or replace the machine harness. Repair the interface control module or replace the interface control module.STOPTest Step 10. CHECK THE OPERATION OF RELAYS 8, 9 and 15
The disconnect switch and key start switch remain in the OFF position.
Remove the jumper wires that were installed in the previous Test Steps.
Install relay 8, 9 and 15.
The machine harness remains disconnected from the ECM.
At the harness connector for the ECM measure the resistance between contact J2-62 (wire EL306-PK) and frame ground. Note the resistance.
At the harness connector for the ECM measure the resistance
At the harness connector for the ECM, measure the resistance from contact J2-59 (wire EL305-PU) to frame ground. Expected Result:The resistance is less than 5 ohms.Results:
YES - The resistance is less than 5 ohms. Proceed to Test Step 9.
NO - The resistance is greater than 5 ohms. The circuit is open.Repair: The machine harness or the interface control module has failed. Repair the machine harness or replace the machine harness. Repair the interface control module or replace the interface control module.STOPTest Step 9. CHECK THE HARNESS CIRCUIT OF RELAY 15
The machine harness remains disconnected from the ECM and relay 15 remains removed.
Connect a jumper wire between contacts 87 and 30 of the base for relay 15.
At the harness connector for the ECM, measure the resistance from contact J2-58 (wire EL307-WH) to frame ground. Expected Result:The resistance is less than 5 ohms.Results:
YES - The resistance is less than 5 ohms. Proceed to Test Step 10.
NO - The resistance is greater than 5 ohms. The circuit is open.Repair: The machine harness or the interface control module has failed. Repair the machine harness or replace the machine harness. Repair the interface control module or replace the interface control module.STOPTest Step 10. CHECK THE OPERATION OF RELAYS 8, 9 and 15
The disconnect switch and key start switch remain in the OFF position.
Remove the jumper wires that were installed in the previous Test Steps.
Install relay 8, 9 and 15.
The machine harness remains disconnected from the ECM.
At the harness connector for the ECM measure the resistance between contact J2-62 (wire EL306-PK) and frame ground. Note the resistance.
At the harness connector for the ECM measure the resistance
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 307B, 317B LN, 318B, 322B L, 325B L, 330B L, 345B, 34...
10-20B, 1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M 2, 160M 3, 160M 3 AWD, 216, 216B,...
3406B, 3406C, 3406E, 3456, 375, 375 L, 385B, 5080, 5090B, 578, 583R, 621G, 623G, 627F, 627G, 651B, 657B, 735, 740, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 834G, 836G, 980C, 980G, 980G...
14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
24M, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 631E, 631G, 633E II, 637E, 637G, 657E, 657G, 772, 772G, 772G OEM, 834H, 834K, 836H, 836K, 988H, 988K, AD45B, AD55, C18, C18 I6, CX31-C18I, ...
6T6791
TUBE AS
24H, 834B, 834G, 836, 836G, 980F, 988B, 988F, 988F II, 988G, AD30, D350E, D350E II, D35HP, D400, D400E, D44B, D550B, R2900, R2900G, R3000H
24H, 834B, 834G, 836, 836G, 980F, 988B, 988F, 988F II, 988G, AD30, D350E, D350E II, D35HP, D400, D400E, D44B, D550B, R2900, R2900G, R3000H
2211880
TUBE AS
988G, 988H
988G, 988H
2244409
TUBE AS
988G
988G
2902298
TUBE AS
834B, 834G, 834H, 834K, 988F II, 988G, 988H, 988K
834B, 834G, 834H, 834K, 988F II, 988G, 988H, 988K
2011005
TUBE AS
988G
988G
1887009
TUBE AS
988G, 988H
988G, 988H
1539784
TUBE AS
834G, 834H, 988G, 988H, AD45B, AD55, AD55B, AD60
834G, 834H, 988G, 988H, AD45B, AD55, AD55B, AD60
2201646
TUBE AS
988G, 988H
988G, 988H
2201645
TUBE AS
988G, 988H
988G, 988H
1988871
TUBE AS
988G, 988H
988G, 988H
1897799
TUBE AS
988G
988G
1546659
TUBE AS
988G, 988H
988G, 988H
2902301
TUBE AS
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 986H, 988F II, 988G, 988H, 988K
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 986H, 988F II, 988G, 988H, 988K
2243872
TUBE AS
988G, 988H
988G, 988H
1662101
TUBE AS
988G, 988H
988G, 988H
2317727
TUBE AS
988G
988G
2127791
TUBE AS
988G
988G
2011005
TUBE AS
988G
988G
2011003
TUBE AS
988G
988G