TUBE AS-INJECTION 2803778 - Caterpillar

Tooling and Accessories
Table 3
Description
(1) Is the flux clean and dry? (Covered and no reground flux)
(2) Are seal installers available for all models of idlers that are serviced?
(3) Are the seal installers in good condition? (No chips or cracks)
(4) Are lint free towels available for cleaning the idler components? (Duo-Cone seals, shafts, retainers, thrust washers)
(5) Is 99% isopropyl alcohol available for lubricating the rubber toric rings for assembly? (Used with lint free towels)
(6) Is 369-9451 Petro Gel Grease (O-ring assembly compound) available for installing the O-rings?
(7) Is tooling available to measure the clearance between the shaft and bearing, seal height, and end play?
(8) Is clean oil available for lubricating the Duo-Cone seals and bearings? (Must be covered and free of contaminants)
Comments:
Literature
Table 4
Description
(1) Is Undercarriage Reconditioning Guide, SEBF8599 current and available to the mechanics and supervisors?
(2) Are the idler wall charts current and available to the mechanics for easy accessibility?
Comments:
Training
Table 5
Description
(1) Have the supervisors and mechanics attended the Undercarriage Repair Process Training Class in Peoria?
(2) Have the mechanics and supervisors been trained on reuse guidelines?
Comments:
Recommendations
Table 6
Notes
Table 7