TUBE AS 2899216 - Caterpillar

Illustration 1 g06332648
Table 1
Item Qty Part Specification Description
1 1 217-8185 Elbow As Torque to 60 6 N m (44 4 lb ft).
2 3 1P-4278 Hose Clamp Torque to 0.9 0.2 N m (8.0 1.8 lb in).
3 6 222-4067 Bolt Torque to 2.25 0.25 N m (19.91 2.21 lb in).
4 1 127-4471 Hose Clamp Torque to 4.5 0.5 N m (39.8 4.4 lb in).
5 1 9M-0164 Hose Clamp Torque to 4.5 0.5 N m (39.8 4.4 lb in).
6 4 8T-4137 Bolt Before you tighten the bolts to required torque, hand tighten the all the bolts.
Torque to 45 5 N m (33 4 lb ft).
7 1 267-8390 Sight Gauge Gp Tighten the bolts of the sight gauge group to 9 1 N m (80 9 lb in).
8 1 384-1132 Bracket As Position the bracket assembly of the hydraulic tank such a that there is a clearance of 31.0 mm (1.22 inch) between the front surface of the bracket assembly and the rare face of the engine block.
While you mount the Hydraulic tank in bracket, a minimum clearance of 7.0 mm (0.28 inch) must be maintained between suction outlet on the tank and filter on transmission.
9 1 - Maximum torque for the hose clamp is 16 N m (142 lb in).