TUBE AS 2915623 - Caterpillar

Removal Procedure
Start By:
Release the system pressure.
Remove the side panels.
Remove the hood.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hot oil.At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns.Remove the fill plug only when the engine is stopped, and the fill plug is cool enough to touch with your bare hand.Do not allow hot oil or components to contact skin.
Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change " for the correct draining and filling procedures.
Illustration 1 g03009900
Release locks (1) and raise grill assembly (2).
Illustration 2 g03795057
Disconnect hoses (3) and hoses (4). Remove hydraulic and transmission oil cooler (5). Installation Procedure
Install the hydraulic and transmission oil cooler assembly (5) in the reverse order of the removal process.