TUBE AS 2928420 - Caterpillar

Illustration 1 g00910231
(1) Parking brake indicator (2) Low oil pressure indicator for the brake system
Illustration 2 g01424187
(3) Action lightThe monitoring system provides three warning categories. A Warning Category 1 requires only operator awareness. When a Warning Category 1 occurs, the monitoring system causes an alert indicator to turn on.A Warning Category 2 needs operator response. When a Warning Category 2 occurs, the monitoring system causes one or more indicators to turn on. A Warning Category 2 also causes action light (3) to turn on.A Warning Category 3 requires immediate shutdown of machine systems. When a Warning Category 3 occurs, the monitoring system causes one or more alert indicators to turn on. The monitoring system also causes action light (3) to flash. The action alarm also sounds.Note: Do not operate the machine until the cause of the warning has been corrected.For the brake system, a Warning Category 1 occurs when the parking brake is in the ENGAGED position, and the transmission is in the NEUTRAL position. This causes parking brake indicator (1) to flash when you start the engine. The alert indicator will turn off when the parking brake is moved to the DISENGAGED position.For the brake system, a Warning Category 2 occurs when oil in either differential oil sump reaches a temperature of 125° 3°C (257° 5°F). However, the warning will turn off when the oil cools to a minimum temperature of 117°C (243°F).
If a Warning Category 2 occurs because the oil in either differential exceeds the maximum recommended operating temperature, immediately reduce the load on the machine by down shifting the transmission. Allow the oil to cool.Failure to reduce axle oil temperature could result in significant damage to rotating components in the axle.
For the brake system, a Warning Category 3 occurs when there is a loss of brake oil pressure in the system. This causes low oil pressure indicator 2 for the brake system to turn on. A Warning Category 3 also occurs if the machine is in operation and the parking brake becomes engaged.When a Warning Category 3 occurs during machine operation, stop the machine immediately and engage the parking brake. Stop the engine. Investigate the cause of the warning before returning the machine to service.ReferenceFor additional information about the instrument cluster, refer to the Service Manual, RENR3065 for the machine that is being serviced.