TUBE AS 2934647 - Caterpillar

Start By:
Remove the transfer gears. Refer to Disassembly and Assembly Manual, "Transfer Gears - Remove".
Illustration 1 g00976253
Remove transfer gear breather (2) from transfer gear case (1) .
Illustration 2 g00976254
Illustration 3 g00976255
Use a suitable pry bar in order to remove gear (3) from transfer gear case (1). Place a suitable identification mark on the gear in order to identify the correct orientation of the gear to the transfer gear case and the positions of bearing (4) and bearing (5) .
Illustration 4 g00976256
Remove retaining ring (6) from bearing (5) .
Illustration 5 g00976257
Use Tooling (A) and Tooling (B) in order to remove bearing (4) from gear (3). Turn over the gear and use the same Tooling to remove bearing (5) .
Illustration 6 g00978858
Use Tooling (C) in order to remove retaining ring (8) from input shaft (7) .
Illustration 7 g00976259
Use Tooling (D) and Tooling (B) in order to remove gear (10) and bearing (9) from input shaft (7) .
Illustration 8 g00976260
Place sufficient cribbing under transfer gear case (1) in order to allow input shaft (7) to be removed. Refer to Illustration 8.
Use a suitable soft mallet to remove input shaft (7) from transfer gear case (1) .
Illustration 9 g00978857
Remove bearing (11) from transfer gear case (1) .
Illustration 10 g00978892
Use Tooling (B) to remove seal (12) from transfer gear case (1) .