TUBE AS 2961273 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses for installation purposes. Plug all hoses. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Illustration 1 g00557911
Open the engine hood. The steering metering pump is located on the left side of the engine compartment.
Illustration 2 g00623730
Disconnect five hoses (2) from steering metering pump (3).
Remove five bolts (4).
Remove steering metering pump (3), the steering shaft, and plate (1) from the machine as a unit.