TUBE AS 2984595 - Caterpillar

Illustration 1 g00291779
Implement Electronic Control Module (1) Connector J1. (2) Connector J2.
Illustration 2 g00291780
Implement Control Connector
Table 1
40-Pin Connector J1    
Connector Pin    Function    
1     + Battery    
2     Ground    
3     Cat Data Link -    
4     Proportional Solenoid (Lower)    
5     Ground    
6     + Battery    
7     Solenoid Return    
8     Pilot On/Off Solenoid Valve    
9     CAT Data Link +    
10     Proportional Solenoid (Lift)    
11     Proportional Solenoid (Tilt Right)    
13     Implement Lockout Switch (normally open switch)    
14     Implement Lockout Switch (normally closed switch)    
15     Digital Return    
16     Digital Return    
17     Proportional Solenoid (Tilt Left)    
21     Kickout Set Switch (normally open switch)    
22     Kickout Set Switch (normally closed switch)    
23     Implement Function Select Switch (normally open switch)    
24     Implement Function Select Switch (normally closed switch)    
25     Automatic Blade Position Enable Switch (normally open switch)    
26     Automatic Blade Position Enable Switch (normally closed switch)    
40     + Battery    
Table 2
40-Pin Connector J2    
Connector Pin    Function    
1     Proportional Solenoid (Tip Back)    
3     Solenoid Return    
8     Proportional Solenoid (Tip Forward)    
9     + 10V    
13     Automatic Blade Position Indicator    
14     Automatic Blade Position Sensor Signal    
30     Tilt Sensor (joystick control)    
34     Automatic Blade Position Audible Indicator    
35     Lift Sensor (joystick control)