AVSPARE.COM
parts catalog

TUBE 2H9740 - Caterpillar



2H9740 TUBE Caterpillar parts TUBE
Rating:
76
Alternative (cross code) number:
CA2H9740
2H-9740
2H9740
Caterpillar 2H9740 TUBE
Weight: 0.04 pounds 0 kg.

Buy TUBE 2H9740 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Saving Display Settings or Machine Settings
Use the "Save Settings" dialog to save display settings, machine settings, or both to a data card. From this dialog, you can save all the settings in the "Setup Menu – Configuration" dialog.You can customize and save the text items that are shown on the guidance screens by saving the display settings.In order to access the "Save Settings" dialog, complete the following steps:
Make sure that a data card is inserted in the Display.
From the "Setup Menu – Configuration" dialog, press the Down arrow or the Up arrow until "Save Settings" is highlighted. Press the "OK" key in order to continue.
The "Save Settings" dialog appears. Press the Down arrow or the Up arrow in order to select either "Display Settings" or "Machine Settings". Refer to Illustration 1.
Illustration 1 g01267656
Illustration 2 g01267657
Press the "OK" key. The dialog shown in Illustration 2 appears.The default file name for display settings is "DISPLAY NN". The default file name for machine settings is "EXCAVATOR(HEX) NN"."NN" is a two digit number starting at 01 and incrementing with each new settings file that is saved.The number assigned to a new "Display Settings" file is one more than any similarly named settings file already on the data card. For example, if there is already a machine settings file named "EXCAVATOR(HEX) 01" on the card, the AccuGrade GPS assigns the name "EXCAVATOR(HEX) 02".You can also save the settings to a file name that is more descriptive. For example, you can use a name such as "345C HEX". Use the arrow keys to edit the default name.Note: You cannot use the Display to overwrite or delete an existing settings file.
In order to save the settings to the data card, press the "OK" key. After saving, the "Save Settings" dialog appears. Press the "ESC" key in order to go back to the "Setup Menu" dialog.In order to close the dialog without saving the configuration to the data card, press the "ESC" key. The "Save Settings" dialog appears.Note: If you change the default name, and then press the "ESC" key, you are prompted to confirm that you want to abandon your changes.


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.