TUBE ASSEM. 2P8966 - Caterpillar

2P8966 TUBE ASSEM. Caterpillar parts 173B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2P8966
2P-8966
2P8966

Weight: 6 pounds 3 kg.

Buy TUBE ASSEM. 2P8966 Caterpillar genuine, new aftermarket tractor parts with delivery
HYDRAULIC CONTROL,

Compatible equipment models: 2P8966:

HYDRAULIC CONTROL 173B Caterpillar

Number on catalog scheme: 22

Caterpillar 2P8966 Parts scheme TUBE ASSEM.

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 372-7975 Injector Sleeve Tool 1
E - Loctite 620 -
F 4C-5552 Large Bore Brush 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the unit injector sleeves and the bores for the unit injectors. Tooling (F) may be used on the bores.
Illustration 1 g03500578
Apply clean engine oil to O-ring seals (1) .
Apply a thin coating of Tooling (E) around the outer circumference of unit injector sleeve (2) at Surface (Z) .
Illustration 2 g03500637
Use Tooling (A) and a hammer to position unit injector sleeve (2) in the cylinder head.Note: Allow Tooling (E) to cure for two hours at 21 °C (70 °F) before filling the engine with fuel or coolant. Longer curing time is required for lower temperatures.
Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct filling procedures.End By: Install the unit injectors.