TUBE ASSEM. 2V8648 - Caterpillar

1. Remove the bolt that holds clip (1) in position on the oil filter base.2. Remove two oil filters (2) with tool (A). 3. Remove the bolts and oil filter base (3).Install Oil Filter Base
1. Make sure O-ring seals (1) and (3) are in position on oil filter base (2). Put clean engine oil on each O-ring seal. 2. Install oil filter base (2) on the engine. 3. Put clean engine oil on seals (4) on both oil filters. Install two oil filters (5) on the oil filter base. When seal (4) comes in contact with the filter base, tighten each oil filter an additional 3/4 of a revolution. 4. Install the bolt that holds clip (6) to the oil filter base.