TUBE ASSEM. 2V9488 - Caterpillar

Table 6
ANTI SPIN FAULTS    
Flash Code    Diagnostic    Fault Name in Software    Description    Possible Causes    
7-1     Left Front Speed Sensor
(Main ECM - Pin 26)
Refer to Diagnostic System Procedure, "Speed Sensor (Left Front Drum) - Test"     CP_AS_FL_Snsr_Flt     Level 1 Fault     Left Front Drum reads 0 Km/h and other three drums read greater than 1 Km/h.    
Left Front Drum input reads 1500mV - 3500mV for 500ms.
7-2     Right Front Speed Sensor
(Main ECM - Pin 25)
Refer to Diagnostic System Procedure, "Speed Sensor (Right Front Drum) - Test"     CP_AS_FR_Snsr_Flt     Level 1 Fault     Right Front Drum reads 0 Km/h and other three drums read greater than 1 Km/h.    
Right Front Drum input reads 1500mV - 3500mV for 500ms.
7-3     Left Rear Speed Sensor
(Main ECM - Pin 24)
Refer to Diagnostic System Procedure, "Speed Sensor (Left Rear Drum) - Test"     CP_AS_RL_Snsr_Flt     Level 1 Fault     Left Rear Drum reads 0 Km/h and other three drums read greater than 1 Km/h.    
Left Rear Drum input reads 1500mV - 3500mV for 500ms.
7-4     Rear Right Speed Sensor
(Main ECM - Pin 23)
Refer to Diagnostic System Procedure, "Speed Sensor (Right Rear Drum) - Test"     CP_AS_RR_Snsr_Flt     Fault Level 1     Right Rear Drum reads 0 Km/h and other three drums read greater than 1 Km/h.    
Right Rear Drum input reads 1500mV - 3500mV for 500ms.
7-5     Front Left Propel Motor Solenoid
(Main ECM - Pin 40)
Refer to Diagnostic System Procedure, "Propel Motor Solenoid Test"     CP_AS_FL_Vlv_Flt     Level 1 Fault     Output is shorted to battery, grounded, or open.    
7-6     Front Right Propel Motor Solenoid
(Main ECM - Pin 39)
Refer to Diagnostic System Procedure, "Propel Motor Solenoid Test"     CP_AS_FR_Vlv_Flt     Fault Level 1     Output is shorted to battery, grounded, or open.    
7-7     Rear Left Propel Motor Solenoid
(Main ECM - Pin 38)
Refer to Diagnostic System Procedure, "Propel Motor Solenoid Test"     CP_AS_RL_Vlv_Flt     Level 1 Fault     Output is shorted to battery, grounded, or open.    
7-8     Rear Right Propel Motor Solenoid
(Main ECM - Pin 37)
Refer to Diagnostic System Procedure, "Propel Motor Solenoid Test"     CP_AS_RR_Vlv_Flt     Level 1 Fault     Output is shorted to battery, grounded, or open.    
Table 7
MISC. FAULTS    
Flash Code    Diagnostic    Fault Name in Software    Description    Possible Causes    
9-1     Sensor Power from the Side Console ECM
(Side Console ECM - Pin 8)
Refer to Diagnostic System Procedure, "Sensor Supply - Test"     CP_AR_Snsr_Pwr_Flt     Level 3 Fault
Sensor Power: The 5V sensor voltage supply is out of range. A voltage below 4.75 or above 5.25 is detected.     Short to battery or ground.    
5-7     Hydraulic Temperature Sensor
(Main ECM - Pin 27)
Refer to Diagnostic System Procedure, "Temperature Sensor (Hydraulic Oil) - Test"     CP_HydOil_Snsr_Flt     Level 1 Fault     Sensor is out of range.    
5-8     Hydraulic Warm Up Solenoid
(Main ECM - Pin 44)
Refer to Diagnostic System Procedure, "Solenoid Valve (Hydraulic Warm-Up) - Test"