TUBE AS 3157503 - Caterpillar

Travel Lock (6)This safety message is located on both tow arms near the screed travel lock pins. This safety message is also located on both hopper wings.
g01372258
Raised hopper wings can unexpectedly swing down and cause a crushing hazard which could result in serious injury or death. Always engage the hopper travel locks in order to secure the hopper in the raised position. Refer to Operation and Maintenance Manual, "Hopper Travel Lock" for directions on engaging the hopper travel lock.
Crushing Hazard (7)This safety message is located on each tow arm.
g01371644
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Entanglement (8)This safety message is located on each tow arm.
g01372260
Stay clear of the work tool during operation. Entanglement could result in personal injury or death.
Falling Hazard (9)This safety message is located on each tow arm.
g01370910
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Shock Hazard (10)This safety message is located on the generator.
g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
High Pressure Line (11)This safety message is located on both sides of the machine below the accumulator valve.
g01372252
Hydraulic accumulator contains gas and oil under high pressure. Improper removal or repair procedures could cause severe injury. To remove or repair, instructions in the service manual must be followed. Special equipment is required for testing and charging.
Aerosol Starting Aid (12)This safety message is located on the air cleaner. The following information is not applicable to machines that are equipped with an ether starting aid.
g01372254
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting" for the proper starting procedure.