TUBE AS 3176752 - Caterpillar

Which Generate This Code:Note: The sensor supply of the ECM provides power to the sensor. The sensor does not connect directly to the frame ground. The sensor connects to the return circuit of the ECM. The ECM internally connects the return wire to frame ground.This diagnostic code is recorded when the ECM detects the signal of the sensor as being out of calibration.In order to correct this diagnostic code, calibrate the sensor. Perform the calibration procedure for the position sensor. See Troubleshooting, "Calibration" for more information.System Response:The diagnostic code of CID 2108 FMI 13 will be logged in the internal memory of the ECM and a level 1 warning will be generated. Implement functions will not be affected.Test Step 1. CALIBRATION
Perform the calibration procedure for the sensor.Expected Result:The calibration procedure was performed successfully.Results:
YES - The calibration procedure was performed successfully. Resume normal machine operation.STOP
NO - The calibration was not successful.Repair: Repeat the calibration procedure for the sensor. See Troubleshooting, "Calibration" for more information.STOP