TUBE AS 3197755 - Caterpillar

Normal Mode
The AccuGrade system automatically defaults to the normal mode when you start-up the display. In order to start the display, turn the key start switch to the ON position. Press the power key on the display.As a default, the following soft keys are available when the display is in "Normal Mode".
Select Blade Tip Focus ("Blade:Left or Blade: Right")
Set the Horizontal Offsets ("H. Offset:")
Set the Vertical Offsets ("V. Offset:")
Turn Map Recording On or Off (if enabled)
Set the GPS Accuracy
Enter laser screen
Setup UTSYou can also use the "Setup Menu - Configuration" dialog to perform the following when you are in Normal mode.
Select Design
Bench (Laser and UTS only)
Vertical Offset
Horizontal Offset
GPS Accuracy
Edit the Blade Wear Value
Vertical Setup
Set the Light Bar Scales and On-Grade Tolerance
Display and Lightbar Brightness
Calibrate Sensors
Set the Valve Speed
Restore the Display Settings or the Machine Settings
View basic Diagnostic InformationRefer to the Operation and Maintenance Manual, SEBU8502 for more details on normal mode operation.Service Mode
If you lack experience with the AccuGrade system, use extreme care when you are in service mode so that you do not accidentally change the AccuGrade system settings.
Service mode allows you to have access to all available options that the AccuGrade system offers.Use service mode in order to change the settings that affect the operation of the AccuGrade system. Additionally, use service mode for the installation of the AccuGrade system.In order to place the display in the service mode, turn the display off if the display is on. Press and hold down the "OK" key then press the power key. Make sure that you hold down the "OK" key until the display begins to initialize.In order to disable the service mode, turn the display off.Use the "Setup Menu - Configuration" screen in order to perform the following when you are in service mode:
Select Design
Bench (Laser only)
Vertical Offset
Horizontal Offset
GPS Accuracy
Blade Wear
Vertical Setup
Increment Switch Adjustment
Lightbar Scales
Display and Lightbar Brightness
Map Recording
Valve Speed
Calibrate sensors
Avoidance Zones
Text items
Plan View Rotation
Beeper Configurations
Save and Restore Settings
GPS Receiver Configuration
Select Radio Band
DiagnosticsUse the "Setup Menu - Installation" dialog to perform the following when you are in service mode:
Set the Machine Settings
Set Units
Set Machine Dimensions
Set the Radio Network
Light Bar Connections
Valve Calibration
Turn on Wireless Communication Support
Turn on Production Recording
Upgrade Firmware
Operator Configuration
Software Option
Enter Software Support Option
Guidance Hours
Select LanguageTurn the display off in order to exit service mode after editing the settings or performing tests on the GPS receiver. This ensures that inexperienced users will not inadvertently change the settings of the AccuGrade system.