AVSPARE.COM
parts catalog

TUBE AS 3236399 - Caterpillar



3236399 TUBE AS Caterpillar parts TUBE
Rating:
41
Alternative (cross code) number:
CA3236399
323-6399
3236399
Caterpillar 3236399 TUBE AS

Buy TUBE AS 3236399 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Start By:
Remove the cab.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned to prevent dirt from entering the internal mechanism.Note: Put identification marks on all hose assemblies and on all harness assemblies for installation purposes. Plug all hose assemblies to prevent fluid loss and to keep contaminants from entering the system.Note: Each transmission modulating valve has the same removal procedure.
Illustration 1 g06291211
Disconnect harness assembly (4) and hose assembly (3).
Remove bolts (2) and transmission modulating valve (1).
Repeat Step 1 and Step 2 for the removal of remaining transmission modulating valves.Disassembly Procedure
Start By:
Remove the modulating valve (transmission).Note: Each transmission modulating valve has the same disassembly procedure.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be cleaned thoroughly. Cleaning will help to prevent dirt from entering the internal mechanism.
Illustration 2 g03680552
Remove O-ring seal (1) from modulating valve (2).
Illustration 3 g03680563
Remove nipple assembly (3) and the O-ring seal.
Remove nut (5) and the washer.
Remove coil assembly (4).
Illustration 4 g03680571
Remove cartridge assembly (6) from modulating valve (2).Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 243 - Note: Each transmission modulating valve has the same assembly procedure.Note: Cleanliness is an important factor. Clean all parts thoroughly in cleaning fluid before assembly. Allow the parts to air dry. Wiping cloths or rags should not use to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 5 g03680571
Install cartridge assembly (6) into modulating valve (2). Tighten cartridge assembly (6) to a torque of 30 5 N m (22 4 lb ft).
Illustration 6 g03680563
Install coil assembly (4).
Apply Tooling (A) to the threads of the cartridge assembly. Install the washer and nut (5). Tighten nut (5) to a torque of 13.0 1.5 N m (115.1 13.3 lb in).
Install the O-ring seal and nipple assembly (3). Tighten nipple assembly (3) to a torque of 14 4 N m (124 35 lb in).
Illustration 7 g03680552
Install O-ring seal (1) into modulating valve (2).End By:
Install the transmission modulating valve.Installation Procedure
Note: Each transmission modulating valve has the same installation procedure.
Illustration 8 g06291211Note: The mounting surfaces for the modulating valve must be clean.
Install transmission modulating valve (1) and bolts (2). Tighten bolts (2) to a torque of 30 4 N m (22 3 lb ft).
Connect hose assembly (3) and harness assembly (3).End By:
Install the cab.


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.