TUBE AS 3486052 - Caterpillar

(1) Maximum lever movement in either forward or reverse ... 23.5°Minimum pilot line pressure of 100 50 kPa (15 7 psi) is obtained when lever movement reaches a 4° angle.Maximum pilot line pressure of 1100 50 kPa (160 7 psi) is obtained when lever movement reaches 23.5° angle.Valve ports:(A) Pilot line port.(B) Pilot line port.(P) Pressure oil inlet port.(T) Tank return line port.(2) Adjust bolts so that there is a 0.20 mm (.008 in) gap between each bolt head and spool. This will insure proper lever movement and reaction in forward and reverse drive. Tighten locknuts (3) to a torque of 5 N m (45 lb in) to hold bolts (2) in the correct position.(4) Torque for bolt ... 5 N m (45 lb in)(5) Torque for bolt ... 5 N m (45 lb in)(6) Torque for bolt ... 1.3 N m (12 lb in)